Messages in this thread Patch in this message | | | From | "Andrew F. Davis" <> | Subject | [PATCH v3 2/6] Documentation: tps65086: Add DT bindings for the TPS65086 regulators | Date | Wed, 4 Nov 2015 11:12:11 -0600 |
| |
The TPS65086 PMIC contains several regulators and a GPO controller. Add bindings for the TPS65086 regulators.
Signed-off-by: Andrew F. Davis <afd@ti.com> --- .../bindings/regulator/tps65086-regulator.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt new file mode 100644 index 0000000..de7d2d6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt @@ -0,0 +1,35 @@ +* TPS65086 regulator bindings + +Required properties: + - compatible : Should be "ti,tps65086-regulator". + - list of regulators provided by this controller, must be named after their + hardware counterparts: buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt. + +Optional properties: + - Per-regulator optional properties are defined in regulator.txt. + - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this + if the regulator is factory set with a 25mv + step voltage mapping. + - ti,regulator-decay : This is applicable for buck[1-6], set this if + the output needs to decay, default is for the + output to slew down. + +Example: + + regulators { + compatible = "ti,tps65086-regulator"; + + buck1 { + regulator-name = "vcc1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + regulator-boot-on; + ti,regulator-step-size-25mv; + ti,regulator-decay; + }; + + swa1 { + regulator-name = "ls1"; + regulator-boot-on; + }; + }; -- 1.9.1
| |