lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] net/macb: bindings doc: Merge cdns-emac to macb
From
Date
Le 30/11/2015 14:51, Michal Simek a écrit :
> Merge two bindings for the same driver to together.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>
> Documentation/devicetree/bindings/net/cdns-emac.txt | 20 --------------------
> Documentation/devicetree/bindings/net/macb.txt | 3 +++
> 2 files changed, 3 insertions(+), 20 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/cdns-emac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
> deleted file mode 100644
> index 4451ee973223..000000000000
> --- a/Documentation/devicetree/bindings/net/cdns-emac.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -* Cadence EMAC Ethernet controller
> -
> -Required properties:
> -- compatible: Should be "cdns,[<chip>-]{emac}"
> - Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> - Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
> - Or the generic form: "cdns,emac".
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain macb interrupt
> -- phy-mode: see ethernet.txt file in the same directory.
> -
> -Examples:
> -
> - macb0: ethernet@fffc4000 {
> - compatible = "cdns,at91rm9200-emac";
> - reg = <0xfffc4000 0x4000>;
> - interrupts = <21>;
> - phy-mode = "rmii";
> - local-mac-address = [3a 0e 03 04 05 06];
> - };
> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
> index b5d79761ac97..1361a6daf63f 100644
> --- a/Documentation/devicetree/bindings/net/macb.txt
> +++ b/Documentation/devicetree/bindings/net/macb.txt
> @@ -2,6 +2,7 @@
>
> Required properties:
> - compatible: Should be "cdns,[<chip>-]{macb|gem}"
> + Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
> available on sama5d3 SoCs.
> Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
> @@ -10,7 +11,9 @@ Required properties:
> Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
> Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
> Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
> + Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
> Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
> + Or the generic form: "cdns,emac".
> - reg: Address and length of the register set for the device
> - interrupts: Should contain macb interrupt
> - phy-mode: See ethernet.txt file in the same directory.
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2015-11-30 15:41    [W:0.212 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site