lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A

On Sun, 29 Nov 2015, Ondrej Zary wrote:

> Add I/O register mapping for NCR53C400A and enable PDMA mode to
> improve performance and fix non-working IRQ.
>
> Tested with HP C2502 (and user-space enabler).
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
> drivers/scsi/g_NCR5380.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index ce444da..c3abe48 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -324,7 +324,10 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> #endif
> break;
> case BOARD_NCR53C400A:
> + flags = FLAG_NO_DMA_FIXUP;
> +#ifndef PSEUDO_DMA
> flags = FLAG_NO_PSEUDO_DMA;
> +#endif

FLAG_NO_PSEUDO_DMA is not tested unless defined(PSEUDO_DMA), so it
shouldn't be set here. I know I made the same mistake in patch 8; it will
be fixed in the next submission.

--

> ports = ncr_53c400a_ports;
> break;
> case BOARD_DTC3181E:
> @@ -412,6 +415,11 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> hostdata->c400_blk_cnt = 1;
> hostdata->c400_host_buf = 4;
> }
> + if (overrides[current_override].board == BOARD_NCR53C400A) {
> + hostdata->c400_ctl_status = 9;
> + hostdata->c400_blk_cnt = 10;
> + hostdata->c400_host_buf = 8;
> + }
> #else
> instance->base = overrides[current_override].NCR5380_map_name;
> hostdata->iomem = iomem;
> @@ -425,7 +433,8 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> if (NCR5380_init(instance, flags))
> goto out_unregister;
>
> - if (overrides[current_override].board == BOARD_NCR53C400)
> + if (overrides[current_override].board == BOARD_NCR53C400 ||
> + overrides[current_override].board == BOARD_NCR53C400A)
> NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
>
> NCR5380_maybe_reset_bus(instance);
>


\
 
 \ /
  Last update: 2015-11-30 13:21    [W:0.606 / U:26.544 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site