lkml.org 
[lkml]   [2015]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] drivers/clk/Kconfig: Move the TI CDCE chips close together
Date
There are two TI CDCE clock chips in this file. Move them close
together so they're easier to find.

No functional change, just cosmetic.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
drivers/clk/Kconfig | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 48ec7d3..26fff3b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -93,6 +93,14 @@ config COMMON_CLK_CDCE925
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.

+config COMMON_CLK_CDCE706
+ tristate "Clock driver for TI CDCE706 clock synthesizer"
+ depends on I2C
+ select REGMAP_I2C
+ select RATIONAL
+ help
+ This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
+
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE
@@ -156,14 +164,6 @@ config COMMON_CLK_PXA
help
Support for the Marvell PXA SoC.

-config COMMON_CLK_CDCE706
- tristate "Clock driver for TI CDCE706 clock synthesizer"
- depends on I2C
- select REGMAP_I2C
- select RATIONAL
- help
- This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
-
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/qcom/Kconfig"
--
1.9.1


\
 
 \ /
  Last update: 2015-11-03 13:01    [W:1.540 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site