lkml.org 
[lkml]   [2015]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry
On Fri, Nov 27, 2015 at 06:28:50PM -0500, Nicolas Pitre wrote:
> On Fri, 27 Nov 2015, Arnd Bergmann wrote:
>
> > I don't mind creating the /proc/atags compatibility hack from the kernel
> > for a DT based N700 kernel, as long as we limit it as much as we can
> > to the machines that need it. Leaving a board file for the N700 in place
> > that contains the procfs code (and not much more) seems reasonable
> > here, as we are talking about a board specific hack and the whole point
> > appears to be running unmodified user space.
> >
> > Regarding how to get the data into the kernel in the first place, my
> > preferred choice would still be to have an intermediate bootloader
> > such as pxa-impedance-matcher, but I won't complain if others are
> > happy enough about putting it into the ATAGS compat code we already
> > have, as long as it's limited to the boards we know need it.
>
> Assuming you have a N700 board file for special procfs code, then why
> not getting at the atags in memory where the bootloader has put them
> directly from that same board file? This way it'll really be limited to
> the board we know needs it and the special exception will be contained
> to that one file. Amongst the machine specific hooks, there is one that
> gets invoked early during boot before those atags are overwritten.

I've already suggested that.

--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-11-28 13:41    [W:0.107 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site