lkml.org 
[lkml]   [2015]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] mmc: sdhci: set bus voltage before enabling bus power
From
On 24 November 2015 at 14:12, Ludovic Desroches
<ludovic.desroches@atmel.com> wrote:
> On Tue, Nov 24, 2015 at 12:01:53PM +0100, Ulf Hansson wrote:
>> On 24 November 2015 at 10:23, Ludovic Desroches
>> <ludovic.desroches@atmel.com> wrote:
>> > Hi Ulf,
>> >
>> > On Mon, Nov 09, 2015 at 05:30:26PM +0100, Ludovic Desroches wrote:
>> >> On Mon, Nov 09, 2015 at 05:00:46PM +0100, Ulf Hansson wrote:
>> >
>> > [...]
>> >
>> >> > Now, this discussion was interesting, but I forgot what problem you
>> >> > actually where trying to solve? :-)
>> >>
>> >> There is this discussion because of two things:
>> >> - Fixing something I consider as a bug: when I have a VMMC, only
>> >> setting/clearing bit 0. Our controller strictly obeys to the spec and
>> >> check the 'SD Bus Voltage Select' field. Since we put a reserved value
>> >> (000), the Power On is not performed.
>> >> - I was trying to get help to understand what is this 'SD Bus Voltage'.
>> >> For our controller and sdhci_set_power(), it seems to stand for VMMC.
>> >> For me, everything concerning bus voltage is related to VQMMC, so I was
>> >> disappointed.
>> >
>> > Do you plan to take the patch for VMMC? If yes, I will send a new patch
>> > for the device tree (I'll only add vmmc, not vqmmc as discussed); if
>> > not, forget these two patches.
>> >
>>
>> Which patch do you refer to for "VMMC"?
>>
>
> This one to not write an invalid voltage in the power control register
> even if we have an external regulator for vmmc.
>

As I stated earlier, according to the SDHCI spec in the section for
the Power Control Register. Bit 0 needs to be set when communicating
with the card as it will for
example enable the clock.

I suspect if I apply your patch several sdhci variants would break,
don't you think?

Kind regards
Uffe


\
 
 \ /
  Last update: 2015-11-24 15:21    [W:0.085 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site