lkml.org 
[lkml]   [2015]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
Date
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
.../devicetree/bindings/remoteproc/st-rproc.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
new file mode 100644
index 0000000..1031bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
@@ -0,0 +1,41 @@
+STMicroelectronics Co-Processor Bindings
+----------------------------------------
+
+This binding provides support for adjunct processors found on ST SoCs.
+
+Co-processors can be controlled from the bootloader or the primary OS. If
+the bootloader starts a co-processor, the primary OS must detect its state
+and act accordingly.
+
+Required properties:
+- compatible Should be one of:
+ "st,st231-rproc"
+ "st,st40-rproc"
+- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
+- resets Reset lines (See: ../reset/reset.txt)
+- reset-names Must be "sw_reset" and "pwr_reset"
+- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-frequency Clock frequency to set co-processor at if the bootloader
+ hasn't already done so
+- st,syscfg System configuration register which holds the boot vector
+ for the co-processor
+ 1st cell: Phandle to syscon block
+ 2nd cell: Boot vector register offset
+
+Example:
+
+ audio_reserved: rproc@42000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x42000000 0x01000000>;
+ no-map;
+ };
+
+ st231-audio {
+ compatible = "st,st231-rproc";
+ memory-region = <&audio_reserved>;
+ resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x228>;
+ };
--
1.9.1


\
 
 \ /
  Last update: 2015-11-24 14:41    [W:0.195 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site