lkml.org 
[lkml]   [2015]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dmaengine: at_xdmac: fix spurious flag status for mem2mem transfers
Date
When setting the channel configuration register, the perid field is not
set to 0 since it is useless for mem2mem transfers. Unfortunately, a
device has 0 as perid. It could cause spurious flags status because
the controller could mix some events from the two channels.
For that reason, use the highest perid value for mem2mem transfers since it
doesn't match the perid of other devices.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
drivers/dma/at_xdmac.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index d09277f..b90e62f 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -863,8 +863,12 @@ at_xdmac_interleaved_queue_desc(struct dma_chan *chan,
* access. Hopefully we can access DDR through both ports (at least on
* SAMA5D4x), so we can use the same interface for source and dest,
* that solves the fact we don't know the direction.
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
*/
- u32 chan_cc = AT_XDMAC_CC_DIF(0)
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
+ | AT_XDMAC_CC_DIF(0)
| AT_XDMAC_CC_SIF(0)
| AT_XDMAC_CC_MBSIZE_SIXTEEN
| AT_XDMAC_CC_TYPE_MEM_TRAN;
@@ -1039,8 +1043,12 @@ at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
* access DDR through both ports (at least on SAMA5D4x), so we can use
* the same interface for source and dest, that solves the fact we
* don't know the direction.
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
*/
- u32 chan_cc = AT_XDMAC_CC_DAM_INCREMENTED_AM
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
| AT_XDMAC_CC_SAM_INCREMENTED_AM
| AT_XDMAC_CC_DIF(0)
| AT_XDMAC_CC_SIF(0)
@@ -1140,8 +1148,12 @@ static struct at_xdmac_desc *at_xdmac_memset_create_desc(struct dma_chan *chan,
* access. Hopefully we can access DDR through both ports (at least on
* SAMA5D4x), so we can use the same interface for source and dest,
* that solves the fact we don't know the direction.
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
*/
- u32 chan_cc = AT_XDMAC_CC_DAM_UBS_AM
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
+ | AT_XDMAC_CC_DAM_UBS_AM
| AT_XDMAC_CC_SAM_INCREMENTED_AM
| AT_XDMAC_CC_DIF(0)
| AT_XDMAC_CC_SIF(0)
--
2.5.0


\
 
 \ /
  Last update: 2015-11-23 14:41    [W:0.143 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site