lkml.org 
[lkml]   [2015]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH LINUX v3 07/10] tty: xuartps: Acquire port lock for shutdown
Date
Shutting down the UART port can happen while console operations are in
progress. Holding the port lock serializes these operations and avoids
the UART HW to be disabled in the middle of console prints.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/tty/serial/xilinx_uartps.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ab3995d00973..f3ac69387b0a 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -826,6 +826,9 @@ static int cdns_uart_startup(struct uart_port *port)
static void cdns_uart_shutdown(struct uart_port *port)
{
int status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);

/* Disable interrupts */
status = readl(port->membase + CDNS_UART_IMR_OFFSET);
@@ -835,6 +838,9 @@ static void cdns_uart_shutdown(struct uart_port *port)
/* Disable the TX and RX */
writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
port->membase + CDNS_UART_CR_OFFSET);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
free_irq(port->irq, port);
}

--
2.6.3.3.g9bb996a


\
 
 \ /
  Last update: 2015-11-22 04:21    [W:0.171 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site