lkml.org 
[lkml]   [2015]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 6/7] Documentation: Rename gpio controller name from cygnus to iproc
Date
Hi Rob,

> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: 20 November 2015 21:05
> To: Pramod Kumar
> Cc: Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Ray Jui; Scott Branden;
> Russell King; Linus Walleij; linux-gpio@vger.kernel.org; bcm-kernel-feedback-
> list; Jason Uy; Masahiro Yamada; Thomas Gleixner; Laurent Pinchart;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; Jonas Gorski
> Subject: Re: [PATCH v2 6/7] Documentation: Rename gpio controller name from
> cygnus to iproc
>
> On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> > Renamed gpio controller's driver name from cygnus to iproc to make it
> > more generic so that all iProc based SoCs having the same gpio
> > controller could use this.
> >
> > Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
> > Reviewed-by: Ray Jui <rjui@broadcom.com>
> > Reviewed-by: Scott Branden <sbranden@broadcom.com>
>
> Where's my ack?

Somehow it got missed. I'm sincerely apologetic for it. Will add it.

Regards,
Pramod
>
> > ---
> > .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-) rename
> > Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt =>
> > brcm,iproc-gpio.txt} (97%)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > similarity index 97%
> > rename from
> > Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > rename to
> > Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > index 8b1e5d1..e427792 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > @@ -1,4 +1,4 @@
> > -Broadcom Cygnus GPIO/PINCONF Controller
> > +Broadcom iProc GPIO/PINCONF Controller
> >
> > Required properties:
> >
> > @@ -7,7 +7,7 @@ Required properties:
> > "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
> >
> > - reg:
> > - Define the base and range of the I/O address space that contains the
> Cygnus
> > + Define the base and range of the I/O address space that contains
> > + SoC
> > GPIO/PINCONF controller registers
> >
> > - ngpios:
> > --
> > 1.9.1
> >


\
 
 \ /
  Last update: 2015-11-20 18:21    [W:0.053 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site