lkml.org 
[lkml]   [2015]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
From
Date
On 10/31/2015 01:44 PM, Rob Herring wrote:
> gmail thinks this is spam BTW.
>

Strange, the mailing lists do too.

> On Sat, Oct 31, 2015 at 11:31 AM, Andrew F. Davis <afd@ti.com> wrote:
>> Add the TI afe4404 heart monitor DT bindings documentation.
>> Create health directory created under iio.
>>
>> Signed-off-by: Andrew F. Davis <afd@ti.com>
>> ---
>> .../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> new file mode 100644
>> index 0000000..d377033
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> @@ -0,0 +1,27 @@
>> +* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
>> +
>> +Required properties:
>> + - compatible : Should be "ti,afe4404".
>> + - reg : I2C address of the device.
>> + - led-supply : Regulator supply to the device.
>
> Is led correct name or copy-n-paste? The datasheet has tx_sup and
> rx_sup for supplies.
>

Looking back at the data sheet it looks like it also has an io_sup.
rx_sup seems to be the supply that must be on to keep the device on.
io_sup and tx_sup can be disabled without losing register values and
reseting the device.

I'm not sure if it makes sense to list the needed supplies, so I may
just rename led-supply to tx_sup-supply and have the be the only one.

>> + - interrupt-parent : Phandle to he parent interrupt controller.
>> + - interrupts : The interrupt line the device ADC_RDY pin is connected to.
>> +
>> +Optional properties:
>> + - reset-gpios : GPIO used to reset the device.
>> +
>> +Example:
>> +
>> +&i2c2 {
>> + heart_mon@58 {
>> + compatible = "ti,afe4404";
>> + reg = <0x58>;
>> +
>> + led-supply = <&vbat>;
>> +
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
>> +
>> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
>> + };
>> +};
>> --
>> 1.9.1
>>


\
 
 \ /
  Last update: 2015-11-02 17:21    [W:2.372 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site