lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/6] qcom: ipq4019: add acc and saw nodes to bring up secondary cores
Date
This adds the required device tree nodes to bring up the
secondary cores on the ipq4019 SoC.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index fc73822..e44f5b6 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -27,29 +27,45 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
+ enable-method = "qcom,kpss-acc-v1";
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
+ clock-frequency = <0>;
};

cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
+ enable-method = "qcom,kpss-acc-v1";
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
+ clock-frequency = <0>;
};

cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
+ enable-method = "qcom,kpss-acc-v1";
+ qcom,acc = <&acc2>;
+ qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
+ clock-frequency = <0>;
};

cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
+ enable-method = "qcom,kpss-acc-v1";
+ qcom,acc = <&acc3>;
+ qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
+ clock-frequency = <0>;
};
};

@@ -92,6 +108,50 @@
interrupts = <0 208 0>;
};

+ acc0: clock-controller@b088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+ };
+
+ acc1: clock-controller@b098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+ };
+
+ acc2: clock-controller@b0a8000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+ };
+
+ acc3: clock-controller@b0b8000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+ };
+
+ saw0: regulator@b089000 {
+ compatible = "qcom,saw2";
+ reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@b099000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
+
+ saw2: regulator@b0a9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
+
+ saw3: regulator@b0b9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
+
serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-11-20 02:01    [W:0.025 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site