Messages in this thread Patch in this message | | | From | Charles Keepax <> | Subject | [PATCH v3 4/6] extcon: arizona: Add device binding for second jack detect pin on GPIO5 | Date | Thu, 19 Nov 2015 15:45:38 +0000 |
| |
Some Arizona devices have the option to use the GPIO5 pin as a second jack detection pin. This patch adds device bindings to specify to the driver that it should use this pin. Note that the second jack detection pin is hard wired in the chip so can only be enabled through the binding, rather than a pin being specified.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/extcon/extcon-arizona.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 27ddf9c..7c9598d 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1244,6 +1244,11 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); + pdata->jd_gpio5 = device_property_read_bool(arizona->dev, + "wlf,use-jd-gpio"); + pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, + "wlf,use-jd-gpio-nopull"); + return 0; } -- 1.7.2.5
| |