lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support
From
Date
Hi Marc,

On 11/18/2015 5:37 PM, Ray Jui wrote:
> Hi Marc,
>
> On 11/18/2015 12:48 AM, Marc Zyngier wrote:
>> On Tue, 17 Nov 2015 16:31:54 -0800
>> Ray Jui <rjui@broadcom.com> wrote:
>>
>> Hi Ray,
>>
>> A few comments below.
>>
>>> This patch adds PCIe MSI support for both PAXB and PAXC interfaces on
>>> all iProc based platforms. The patch follows the latest trend in the
>>> kernel to use MSI domain based implementation
>>>
>>> This iProc event queue based MSI support should not be used with newer
>>> platforms with integrated MSI support in the GIC (e.g., giv2m or
>>> gicv3-its)
>>>
>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>> Reviewed-by: Anup Patel <anup.patel@broadcom.com>
>>> Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>> ---
>>> drivers/pci/host/Kconfig | 9 +
>>> drivers/pci/host/Makefile | 1 +
>>> drivers/pci/host/pcie-iproc-msi.c | 434
>>> ++++++++++++++++++++++++++++++++++++++
>>> drivers/pci/host/pcie-iproc.c | 19 ++
>>> drivers/pci/host/pcie-iproc.h | 12 ++
>>> 5 files changed, 475 insertions(+)
>>> create mode 100644 drivers/pci/host/pcie-iproc-msi.c
>>>
>>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
>>> index f131ba9..972e906 100644
>>> --- a/drivers/pci/host/Kconfig
>>> +++ b/drivers/pci/host/Kconfig
>>> @@ -126,6 +126,15 @@ config PCIE_IPROC
>>> iProc family of SoCs. An appropriate bus interface driver
>>> also needs
>>> to be enabled
>>>
>>> +config PCIE_IPROC_MSI
>>> + bool "Broadcom iProc PCIe MSI support"
>>> + depends on ARCH_BCM_IPROC && PCI_MSI
>>> + select PCI_MSI_IRQ_DOMAIN
>>> + default ARCH_BCM_IPROC
>>> + help
>>> + Say Y here if you want to enable MSI support for Broadcom's iProc
>>> + PCIe controller
>>> +
>>> config PCIE_IPROC_PLATFORM
>>> tristate "Broadcom iProc PCIe platform bus driver"
>>> depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
>>> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
>>> index 9d4d3c6..0e4e95e 100644
>>> --- a/drivers/pci/host/Makefile
>>> +++ b/drivers/pci/host/Makefile
>>> @@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
>>> obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
>>> obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
>>> obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
>>> +obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
>>> obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
>>> obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
>>> obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
>>> diff --git a/drivers/pci/host/pcie-iproc-msi.c
>>> b/drivers/pci/host/pcie-iproc-msi.c
>>> new file mode 100644
>>> index 0000000..a55c707
>>> --- /dev/null
>>> +++ b/drivers/pci/host/pcie-iproc-msi.c
>>> @@ -0,0 +1,434 @@
>>> +/*
>>> + * Copyright (C) 2015 Broadcom Corporation
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + *
>>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>>> + * kind, whether express or implied; without even the implied warranty
>>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/irqchip/chained_irq.h>
>>> +#include <linux/irqdomain.h>
>>> +#include <linux/msi.h>
>>> +#include <linux/of_irq.h>
>>> +#include <linux/of_pci.h>
>>> +#include <linux/pci.h>
>>> +
>>> +#include "pcie-iproc.h"
>>> +
>>> +#define IPROC_MSI_INTS_EN_OFFSET 0x208
>>> +#define IPROC_MSI_INTR_EN_SHIFT 11
>>> +#define IPROC_MSI_INTR_EN BIT(IPROC_MSI_INTR_EN_SHIFT)
>>> +#define IPROC_MSI_INT_N_EVENT_SHIFT 1
>>> +#define IPROC_MSI_INT_N_EVENT BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
>>> +#define IPROC_MSI_EQ_EN_SHIFT 0
>>> +#define IPROC_MSI_EQ_EN BIT(IPROC_MSI_EQ_EN_SHIFT)
>>> +
>>> +#define IPROC_MSI_EQ_MASK 0x3f
>>> +
>>> +/* number of queues in each event queue */
>>> +#define IPROC_MSI_EQ_LEN 64
>>> +
>>> +/* size of each event queue memory region */
>>> +#define EQ_MEM_REGION_SIZE SZ_4K
>>> +
>>> +/* size of each MSI message memory region */
>>> +#define MSI_MSG_MEM_REGION_SIZE SZ_4K
>>> +
>>> +enum iproc_msi_reg {
>>> + IPROC_MSI_EQ_PAGE = 0,
>>> + IPROC_MSI_EQ_PAGE_UPPER,
>>> + IPROC_MSI_PAGE,
>>> + IPROC_MSI_PAGE_UPPER,
>>> + IPROC_MSI_CTRL,
>>> + IPROC_MSI_EQ_HEAD,
>>> + IPROC_MSI_EQ_TAIL,
>>> + IPROC_MSI_REG_SIZE,
>>> +};
>>> +
>>> +/**
>>> + * iProc event queue based MSI
>>> + *
>>> + * Only meant to be used on platforms without MSI support integrated
>>> into the
>>> + * GIC
>>> + *
>>> + * @pcie: pointer to iProc PCIe data
>>> + * @reg_offsets: MSI register offsets
>>> + * @irqs: pointer to an array that contains the interrupt IDs
>>> + * @nirqs: number of total interrupts
>>> + * @has_inten_reg: indicates the MSI interrupt enable register needs
>>> to be
>>> + * set explicitly (required for some legacy platforms)
>>> + * @used: bitmap to track usage of MSI
>>> + * @inner_domain: inner IRQ domain
>>> + * @msi_domain: MSI IRQ domain
>>> + * @bitmap_lock: lock to protect access to the IRQ bitmap
>>> + * @n_eq_region: required number of 4K aligned memory region for MSI
>>> event
>>> + * queues
>>> + * @n_msi_msg_region: required number of 4K aligned memory region
>>> for MSI
>>> + * posted writes
>>> + * @eq_base: pointer to allocated memory region for MSI event queues
>>> + * @msi_base: pointer to allocated memory region for MSI posted writes
>>> + */
>>> +struct iproc_msi {
>>> + struct iproc_pcie *pcie;
>>> + const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
>>> + int *irqs;
>>> + int nirqs;
>>> + bool has_inten_reg;
>>> + DECLARE_BITMAP(used, IPROC_PCIE_MAX_NUM_IRQS);
>>> + struct irq_domain *inner_domain;
>>> + struct irq_domain *msi_domain;
>>> + struct mutex bitmap_lock;
>>> + unsigned int n_eq_region;
>>> + unsigned int n_msi_msg_region;
>>> + void *eq_base;
>>> + void *msi_base;
>>> +};
>>> +
>>> +static const u16
>>> +iproc_msi_reg_paxb[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254 },
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c },
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264 },
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c },
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274 },
>>> + { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c },
>>> +};
>>> +
>>> +static const u16
>>> +iproc_msi_reg_paxc[IPROC_PCIE_MAX_NUM_IRQS][IPROC_MSI_REG_SIZE] = {
>>> + { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
>>> + { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
>>> + { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },
>>> + { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
>>> +};
>>> +
>>> +static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
>>> + enum iproc_msi_reg reg,
>>> + unsigned int eq)
>>> +{
>>> + struct iproc_pcie *pcie = msi->pcie;
>>> +
>>> + return readl(pcie->base + msi->reg_offsets[eq][reg]);
>>
>> Do you need the extra barrier implied by readl? readl_relaxed should be
>> enough.
>>
>>> +}
>>> +
>>> +static inline void iproc_msi_write_reg(struct iproc_msi *msi,
>>> + enum iproc_msi_reg reg,
>>> + int eq, u32 val)
>>> +{
>>> + struct iproc_pcie *pcie = msi->pcie;
>>> +
>>> + writel(val, pcie->base + msi->reg_offsets[eq][reg]);
>>
>> Same here for writel vs writel_relaxed.
>>
>
> I probably do not need the barrier in most cases. But as we are dealing
> with MSI, I thought it's a lot safer to have the barrier in place so the
> CPU does not re-order the device register accesses with respect to other
> memory accesses?
>
>>> +}
>>> +
>>> +static struct irq_chip iproc_msi_top_irq_chip = {
>>> + .name = "iProc MSI",
>>> + .irq_enable = pci_msi_unmask_irq,
>>> + .irq_disable = pci_msi_mask_irq,
>>> + .irq_mask = pci_msi_mask_irq,
>>> + .irq_unmask = pci_msi_unmask_irq,
>>
>> There is no need to provide both enable/disable and mask/unmask. And
>> since pci_msi_{un}mask_irq is the default, you can get rid of these
>> function pointers anyway.
>>
>
> Got it. Like you said, the mask/unmask callback are defaulted to
> pci_msi_{un}mask_irq in pci_msi_domain_update_chip_ops, called when the
> MSI irq domain is created.
>
> I'll get rid of all the callback assignments here.
>
>>> +};
>>> +
>>> +static struct msi_domain_info iproc_msi_domain_info = {
>>> + .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
>>> + MSI_FLAG_PCI_MSIX,
>>> + .chip = &iproc_msi_top_irq_chip,
>>> +};
>>> +
>>> +static int iproc_msi_irq_set_affinity(struct irq_data *data,
>>> + const struct cpumask *mask, bool force)
>>> +{
>>> + return -EINVAL;
>>
>> I wish people would stop building stupid HW that prevents proper
>> affinity setting for MSI...
>>
>
> In fact, there's no reason why the HW should prevent us from setting the
> MSI affinity. This is currently more of a SW issue that I have not spent
> enough time figuring out.
>
> Here's my understanding:
>
> In our system, each MSI is linked to a dedicated interrupt line
> connected to the GIC upstream (e.g., the GIC from Cortex A9 in Cygnus).

Okay I need to take my words back. I just had a long meeting with our
ASIC engineer. In fact, we are supposed to be able to support up to 64
MSI vectors per GIC interrupt line.

> Correct me if I'm wrong, to get the MSI affinity to work, all I need
> should be propagating the affinity setting to the GIC (the 1-to-1
> mapping helps simply things quite a bit here)?

Now MSI affinity gets much more complicated and I'm not sure how the HW
can support it. I need more meetings with our ASIC engineers to figure
this out. I'm not planning to support MSI IRQ affinity at this point.

>
> I tried to hook this up with irq_chip_set_affinity_parent. But it looks
> like the irq chip of the parent domain (i.e., the GIC) is pointing to
> NULL, and therefore it would crash when dereferencing it to get the
> irq_set_affinity callback.
>
> I thought I did everything required by figuring out and linking to the
> correct parent domain in the iproc_msi_init routine:
>
> parent_node = of_parse_phandle(node, "interrupt-parent", 0);
> if (!parent_node) {
> dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
> return -ENODEV;
> }
>
> parent_domain = irq_find_host(parent_node);
> if (!parent_domain) {
> dev_err(pcie->dev, "unable to get MSI parent domain\n");
> return -ENODEV;
> }
>
> ...
> ...
>
> msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,
> msi->nirqs, NULL,
> &msi_domain_ops,
> msi);
>
> I haven't spent too much time investigating, and am hoping to eventually
> enable affinity support with an incremental patch in the future when I
> have more time to investigate.
>
>>> +}
>>> +
>>> +static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
>>> + struct msi_msg *msg)
>>> +{
>>> + struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
>>> + phys_addr_t addr;
>>> +
>>> + addr = virt_to_phys(msi->msi_base) | (data->hwirq * 4);
>>> + msg->address_lo = lower_32_bits(addr);
>>> + msg->address_hi = upper_32_bits(addr);
>>> + msg->data = data->hwirq;
>>> +}
>>> +
>>> +static struct irq_chip iproc_msi_bottom_irq_chip = {
>>> + .name = "MSI",
>>> + .irq_set_affinity = iproc_msi_irq_set_affinity,
>>> + .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
>>> +};
>>> +
>>> +static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
>>> + unsigned int virq, unsigned int nr_irqs,
>>> + void *args)
>>> +{
>>> + struct iproc_msi *msi = domain->host_data;
>>> + int i, msi_irq;
>>> +
>>> + mutex_lock(&msi->bitmap_lock);
>>> +
>>> + for (i = 0; i < nr_irqs; i++) {
>>> + msi_irq = find_first_zero_bit(msi->used, msi->nirqs);
>>
>> This is slightly puzzling. Do you really have at most 6 MSIs? Usually,
>> we end up with a larger number of MSIs (32 or 64) multiplexed on top of
>> a small number of wired interrupts. Here, you seem to have a 1-1
>> mapping. Is that really the case?
>
> Yes, based on the poorly written iProc PCIe arch doc, :), we seem to
> have 1-1 mapping between each wired interrupt and MSI, with each MSI
> handled by an event queue, that consists of 64x word entries allocated
> from host memory (DDR). The MSI data is stored in the low 16-bit of each
> entry, whereas the upper 16-bit of each entry is reserved for the iProc
> PCIe controller for its own use.
>

So yeah, you are right. We should be able to support up to 64 MSI
vectors per interrupt. This is just embarrassing.... :(

And thanks for pointing this out.

>>
>> If so (and assuming the wired interrupts are always contiguous), you
>> shouldn't represent this as a chained interrupt (a multiplexer), but as
>> a stacked irqchip, similar to what GICv2m does.
>>
>
> Okay, I think I might be missing something here, but I thought I
> currently have a stacked irqdomain (chip), i.e., GIC -> inner_domain ->
> MSI domain?
>
> And does this imply I should expect 'nr_irqs' in this routine to be
> always zero and therefore I can get rid of the for loop here (same in
> the domain free routine)?

And yeah, chained IRQ will be used for all MSI vectors in each interrupt
line.

>
>>> + if (msi_irq < msi->nirqs) {
>>> + set_bit(msi_irq, msi->used);
>>> + } else {
>>> + mutex_unlock(&msi->bitmap_lock);
>>> + return -ENOSPC;
>>> + }
>>> +
>>> + irq_domain_set_info(domain, virq + i, msi_irq,
>>> + &iproc_msi_bottom_irq_chip,
>>> + domain->host_data, handle_simple_irq,
>>> + NULL, NULL);
>>> + }
>>> +
>>> + mutex_unlock(&msi->bitmap_lock);
>>> + return 0;
>>> +}
>>> +
>>> +static void iproc_msi_irq_domain_free(struct irq_domain *domain,
>>> + unsigned int virq, unsigned int nr_irqs)
>>> +{
>>> + struct irq_data *data = irq_domain_get_irq_data(domain, virq);
>>> + struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
>>> + unsigned int i;
>>> +
>>> + mutex_lock(&msi->bitmap_lock);
>>> +
>>> + for (i = 0; i < nr_irqs; i++) {
>>> + struct irq_data *data = irq_domain_get_irq_data(domain,
>>> + virq + i);
>>> + if (!test_bit(data->hwirq, msi->used)) {
>>> + dev_warn(msi->pcie->dev, "freeing unused MSI %lu\n",
>>> + data->hwirq);
>>> + } else
>>> + clear_bit(data->hwirq, msi->used);
>>> + }
>>> +
>>> + mutex_unlock(&msi->bitmap_lock);
>>> + irq_domain_free_irqs_parent(domain, virq, nr_irqs);
>>> +}
>>> +
>>> +static const struct irq_domain_ops msi_domain_ops = {
>>> + .alloc = iproc_msi_irq_domain_alloc,
>>> + .free = iproc_msi_irq_domain_free,
>>> +};
>>> +
>>> +static void iproc_msi_enable(struct iproc_msi *msi)
>>> +{
>>> + struct iproc_pcie *pcie = msi->pcie;
>>> + int i, eq;
>>> + u32 val;
>>> +
>>> + /* program memory region for each event queue */
>>> + for (i = 0; i < msi->n_eq_region; i++) {
>>> + phys_addr_t addr =
>>> + virt_to_phys(msi->eq_base + (i * EQ_MEM_REGION_SIZE));
>>> +
>>> + iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
>>> + lower_32_bits(addr));
>>> + iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
>>> + upper_32_bits(addr));
>>> + }
>>> +
>>> + /* program memory region for MSI posted writes */
>>> + for (i = 0; i < msi->n_msi_msg_region; i++) {
>>> + phys_addr_t addr =
>>> + virt_to_phys(msi->msi_base +
>>> + (i * MSI_MSG_MEM_REGION_SIZE));
>>
>> You seem to be a victim of checkpatch. Please don't split statements
>> like this, it just make it harder to read. My terminal can wrap lines
>> very conveniently, and I don't care about the 80 character limit...
>>
>
> Okay will fix.
>
>>> +
>>> + iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
>>> + lower_32_bits(addr));
>>> + iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
>>> + upper_32_bits(addr));
>>> + }
>>> +
>>> + for (eq = 0; eq < msi->nirqs; eq++) {
>>> + /* enable MSI event queue */
>>> + val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
>>> + IPROC_MSI_EQ_EN;
>>> + iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
>>> +
>>> + /*
>>> + * Some legacy platforms require the MSI interrupt enable
>>> + * register to be set explicitly
>>> + */
>>> + if (msi->has_inten_reg) {
>>> + val = readl(pcie->base + IPROC_MSI_INTS_EN_OFFSET);
>>> + val |= BIT(eq);
>>> + writel(val, pcie->base + IPROC_MSI_INTS_EN_OFFSET);
>>> + }
>>> + }
>>> +}
>>> +
>>> +static void iproc_msi_handler(struct irq_desc *desc)
>>> +{
>>> + unsigned int irq = irq_desc_get_irq(desc);
>>> + struct irq_chip *irq_chip = irq_desc_get_chip(desc);
>>> + struct iproc_msi *msi;
>>> + struct iproc_pcie *pcie;
>>> + u32 eq, head, tail, num_events;
>>> + int virq;
>>> +
>>> + chained_irq_enter(irq_chip, desc);
>>> +
>>> + msi = irq_get_handler_data(irq);
>>> + pcie = msi->pcie;
>>> +
>>> + eq = irq - msi->irqs[0];
>>> + virq = irq_find_mapping(msi->inner_domain, eq);
>>> + head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, eq) &
>>> + IPROC_MSI_EQ_MASK;
>>> + do {
>>> + tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, eq) &
>>> + IPROC_MSI_EQ_MASK;
>>> +
>>> + num_events = (tail < head) ?
>>> + (IPROC_MSI_EQ_LEN - (head - tail)) : (tail - head);
>>> + if (!num_events)
>>> + break;
>>> +
>>> + generic_handle_irq(virq);
>>> +
>>> + head++;
>>> + head %= IPROC_MSI_EQ_LEN;
>>> + iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
>>> + } while (true);
>>
>> That's unusual. You seem to get only one interrupt for a bunch of MSIs,
>> all representing the same IRQ? That feels very weird, as you can
>> usually collapse edge interrupts.
>>
>
> I think we get one GIC interrupt per MSI line (1:1 mapping), but then
> the MSI data message can be more than one, stored in the event queue
> reserved for that MSI/interrupt line.
>
> When you mentioned chained IRQ above, do you really mean the logic here?
> In fact, I don't think I really need to use the chained irq APIs here,
> as the MSI and GIC interrupt line has a 1-to-1 mapping.
>

The above routine needs to be modified to:

go through the event queue and identify each MSI vector to be serviced,
and service them by calling generic_handle_irq.

>>> +
>>> + chained_irq_exit(irq_chip, desc);
>>> +}
>>> +
>
> Can probably get rid of the chained_irq_enter and exit?
>
>>> +int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
>>> +{
>>> + struct iproc_msi *msi;
>>> + struct device_node *parent_node;
>>> + struct irq_domain *parent_domain;
>>> + int i, ret;
>>> +
>>> + if (!of_device_is_compatible(node, "brcm,iproc-msi"))
>>> + return -ENODEV;
>>> +
>>> + if (!of_find_property(node, "msi-controller", NULL))
>>> + return -ENODEV;
>>> +
>>> + parent_node = of_parse_phandle(node, "interrupt-parent", 0);
>>> + if (!parent_node) {
>>> + dev_err(pcie->dev, "unable to parse MSI interrupt parent\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + parent_domain = irq_find_host(parent_node);
>>> + if (!parent_domain) {
>>> + dev_err(pcie->dev, "unable to get MSI parent domain\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
>>> + if (!msi)
>>> + return -ENOMEM;
>>> +
>>> + msi->pcie = pcie;
>>> + mutex_init(&msi->bitmap_lock);
>>> +
>>> + switch (pcie->type) {
>>> + case IPROC_PCIE_PAXB:
>>> + msi->reg_offsets = iproc_msi_reg_paxb;
>>> + break;
>>> + case IPROC_PCIE_PAXC:
>>> + msi->reg_offsets = iproc_msi_reg_paxc;
>>> + break;
>>> + default:
>>> + dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + ret = of_property_read_u32(node, "brcm,num-eq-region",
>>> + &msi->n_eq_region);
>>> + if (ret || msi->n_eq_region == 0) {
>>> + dev_err(pcie->dev,
>>> + "invalid property 'brcm,num-eq-region' %u\n",
>>> + msi->n_eq_region);
>>> + return -ENODEV;
>>> + }
>>> +
>>> + ret = of_property_read_u32(node, "brcm,num-msi-msg-region",
>>> + &msi->n_msi_msg_region);
>>> + if (ret || msi->n_msi_msg_region == 0) {
>>> + dev_err(pcie->dev,
>>> + "invalid property 'brcm,num-msi-msg-region' %u\n",
>>> + msi->n_msi_msg_region);
>>> + return -ENODEV;
>>> + }
>>> +
>>> + /* reserve memory for MSI event queue */
>>> + msi->eq_base = devm_kcalloc(pcie->dev, msi->n_eq_region + 1,
>>> + EQ_MEM_REGION_SIZE, GFP_KERNEL);
>>> + if (!msi->eq_base)
>>> + return -ENOMEM;
>>> + msi->eq_base = PTR_ALIGN(msi->eq_base, EQ_MEM_REGION_SIZE);
>>> +
>>> + /* reserve memory for MSI posted writes */
>>> + msi->msi_base = devm_kcalloc(pcie->dev, msi->n_msi_msg_region + 1,
>>> + MSI_MSG_MEM_REGION_SIZE, GFP_KERNEL);
>>> + if (!msi->msi_base)
>>> + return -ENOMEM;
>>> + msi->msi_base = PTR_ALIGN(msi->msi_base, MSI_MSG_MEM_REGION_SIZE);
>>> +
>>> + if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
>>> + msi->has_inten_reg = true;
>>> +
>>> + msi->nirqs = of_irq_count(node);
>>> + if (!msi->nirqs) {
>>> + dev_err(pcie->dev, "found no MSI interrupt in DT\n");
>>> + return -ENODEV;
>>> + }
>>> + if (msi->nirqs > IPROC_PCIE_MAX_NUM_IRQS) {
>>> + dev_warn(pcie->dev, "too many MSI interrupts defined %d\n",
>>> + msi->nirqs);
>>> + msi->nirqs = IPROC_PCIE_MAX_NUM_IRQS;
>>> + }
>>> + msi->irqs = devm_kcalloc(pcie->dev, msi->nirqs, sizeof(*msi->irqs),
>>> + GFP_KERNEL);
>>> + if (!msi->irqs)
>>> + return -ENOMEM;
>>> +
>>> + for (i = 0; i < msi->nirqs; i++) {
>>> + msi->irqs[i] = irq_of_parse_and_map(node, i);
>>> + if (!msi->irqs[i]) {
>>> + dev_err(pcie->dev, "unable to parse/map interrupt\n");
>>> + return -ENODEV;
>>> + }
>>> + }
>>> +
>>> + msi->inner_domain = irq_domain_add_hierarchy(parent_domain, 0,
>>> + msi->nirqs, NULL,
>>> + &msi_domain_ops,
>>> + msi);
>>> + if (!msi->inner_domain) {
>>> + dev_err(pcie->dev, "failed to create inner domain\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + msi->msi_domain =
>>> pci_msi_create_irq_domain(of_node_to_fwnode(node),
>>> + &iproc_msi_domain_info,
>>> + msi->inner_domain);
>>> + if (!msi->msi_domain) {
>>> + dev_err(pcie->dev, "failed to create MSI domain\n");
>>> + irq_domain_remove(msi->inner_domain);
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + for (i = 0; i < msi->nirqs; i++)
>>> + irq_set_chained_handler_and_data(msi->irqs[i],
>>> + iproc_msi_handler, msi);
>>> +
>>> + iproc_msi_enable(msi);
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL(iproc_msi_init);
>>
>> Do you really intend for this to be built as a standalone module?
>>
>
> The iProc MSI driver is statically linked in, but the iProc PCIe core
> driver can be built as a module. The EXPORT_SYMBOL here is for
> iproc_msi_init to be exported symbol to iProc PCIe core driver when
> built as module.
>
>>> diff --git a/drivers/pci/host/pcie-iproc.c
>>> b/drivers/pci/host/pcie-iproc.c
>>> index 24d5b62..a575ef3 100644
>>> --- a/drivers/pci/host/pcie-iproc.c
>>> +++ b/drivers/pci/host/pcie-iproc.c
>>> @@ -440,6 +440,21 @@ static int iproc_pcie_map_ranges(struct
>>> iproc_pcie *pcie,
>>> return 0;
>>> }
>>>
>>> +static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
>>> +{
>>> + struct device_node *msi_node;
>>> +
>>> + msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
>>> + if (!msi_node)
>>> + return -ENODEV;
>>> +
>>> + /*
>>> + * If another MSI controller is being used, the call below
>>> should fail
>>> + * but that is okay
>>> + */
>>> + return iproc_msi_init(pcie, msi_node);
>>> +}
>>> +
>>> int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
>>> {
>>> int ret;
>>> @@ -507,6 +522,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie,
>>> struct list_head *res)
>>>
>>> iproc_pcie_enable(pcie);
>>>
>>> + if (IS_ENABLED(CONFIG_PCI_MSI))
>>> + if (iproc_pcie_msi_enable(pcie))
>>> + dev_info(pcie->dev, "not using iProc MSI\n");
>>> +
>>> pci_scan_child_bus(bus);
>>> pci_assign_unassigned_bus_resources(bus);
>>> pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
>>> diff --git a/drivers/pci/host/pcie-iproc.h
>>> b/drivers/pci/host/pcie-iproc.h
>>> index 051b651..17317ef 100644
>>> --- a/drivers/pci/host/pcie-iproc.h
>>> +++ b/drivers/pci/host/pcie-iproc.h
>>> @@ -14,6 +14,8 @@
>>> #ifndef _PCIE_IPROC_H
>>> #define _PCIE_IPROC_H
>>>
>>> +#define IPROC_PCIE_MAX_NUM_IRQS 6
>>> +
>>
>> I don't see the point in putting this in an include file, as it is only
>> used in a single location.
>>
>
> Okay. Will move it into pcie-iproc-msi.c
>
>>> /**
>>> * iProc PCIe interface type
>>> *
>>> @@ -74,4 +76,14 @@ struct iproc_pcie {
>>> int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
>>> int iproc_pcie_remove(struct iproc_pcie *pcie);
>>>
>>> +#ifdef CONFIG_PCI_MSI
>>> +int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
>>> +#else
>>> +static inline int iproc_msi_init(struct iproc_pcie *pcie,
>>> + struct device_node *node)
>>> +{
>>> + return -ENODEV;
>>> +}
>>> +#endif
>>> +
>>> #endif /* _PCIE_IPROC_H */
>>
>> Thanks,
>>
>> M.
>>
>
> Thanks a lot for the review. I really appreciate it!
>
> Ray

Thanks,

Ray

\
 
 \ /
  Last update: 2015-11-19 08:41    [W:0.151 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site