lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 13/71] ncr5380: Remove redundant register writes
Remove the duplicate write to the Select Enable Register that appeared
in v1.1.38.

Also remove the redundant write to Initiator Command Register prior to
calling do_abort().

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

---
drivers/scsi/NCR5380.c | 2 --
drivers/scsi/atari_NCR5380.c | 3 ---
2 files changed, 5 deletions(-)

Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-11-18 19:33:18.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-11-18 19:33:19.000000000 +1100
@@ -1384,7 +1384,6 @@ part2:
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return 0;
}
hostdata->targets_present |= (1 << scmd_id(cmd));
@@ -2076,7 +2075,6 @@ static void NCR5380_information_transfer
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-11-18 19:33:18.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-11-18 19:33:19.000000000 +1100
@@ -1640,7 +1640,6 @@ static int NCR5380_select(struct Scsi_Ho
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return 0;
}

@@ -2192,8 +2191,6 @@ static void NCR5380_information_transfer
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;



\
 
 \ /
  Last update: 2015-11-18 10:41    [W:0.434 / U:1.828 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site