lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 57/71] ncr5380: Use standard list data structure
The NCR5380 drivers have a home-spun linked list implementation for
scsi_cmnd structs that uses cmd->host_scribble as a 'next' pointer. Adopt
the standard list_head data structure and list operations instead. Remove
the eh_abort_handler rather than convert it. Doing the conversion would
only be churn because the existing EH handlers don't work and get replaced
in a subsequent patch.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

---
drivers/scsi/NCR5380.c | 214 +++++---------------------------
drivers/scsi/NCR5380.h | 16 ++
drivers/scsi/arm/cumana_1.c | 1
drivers/scsi/arm/oak.c | 1
drivers/scsi/atari_NCR5380.c | 285 ++++++-------------------------------------
drivers/scsi/atari_scsi.c | 1
drivers/scsi/dmx3191d.c | 1
drivers/scsi/dtc.c | 1
drivers/scsi/g_NCR5380.c | 1
drivers/scsi/mac_scsi.c | 1
drivers/scsi/pas16.c | 1
drivers/scsi/sun3_scsi.c | 1
drivers/scsi/t128.c | 1
13 files changed, 105 insertions(+), 420 deletions(-)

Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-11-18 19:34:18.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-11-18 19:34:20.000000000 +1100
@@ -633,8 +633,9 @@ static int NCR5380_init(struct Scsi_Host
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
hostdata->flags = flags;

INIT_WORK(&hostdata->main_task, NCR5380_main);
@@ -734,7 +735,7 @@ static int NCR5380_queue_command(struct
struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp;
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;

#if (NDEBUG & NDEBUG_NO_WRITE)
@@ -748,12 +749,6 @@ static int NCR5380_queue_command(struct
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */

- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- cmd->host_scribble = NULL;
cmd->result = 0;

spin_lock_irqsave(&hostdata->lock, flags);
@@ -765,13 +760,11 @@ static int NCR5380_queue_command(struct
* sense data is only guaranteed to be valid while the condition exists.
*/

- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- cmd->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
- tmp->host_scribble = (unsigned char *) cmd;
- }
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
+
spin_unlock_irqrestore(&hostdata->lock, flags);

dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
@@ -799,7 +792,7 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct NCR5380_cmd *ncmd, *n;
int done;

spin_lock_irq(&hostdata->lock);
@@ -812,23 +805,20 @@ static void NCR5380_main(struct work_str
* Search through the issue_queue for a command destined
* for a target that's not busy.
*/
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
- {
+ list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
+ list) {
+ struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
+
dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%llu\n",
tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
tmp->device->lun);
/* When we find one, remove it from the issue queue. */
if (!(hostdata->busy[tmp->device->id] &
(1 << (u8)(tmp->device->lun & 0xff)))) {
- if (prev) {
- prev->host_scribble = tmp->host_scribble;
- } else {
- hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
+ list_del(&ncmd->list);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue %p\n",
- tmp, prev);
+ instance, "main: removed %p from issue queue\n",
+ tmp);

/*
* Attempt to establish an I_T_L nexus here.
@@ -847,8 +837,7 @@ static void NCR5380_main(struct work_str
/* OK or bad target */
} else {
/* Need to retry */
- tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = tmp;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
instance, "main: select() failed, %p returned to issue queue\n",
tmp);
@@ -1751,6 +1740,8 @@ static void NCR5380_information_transfer
struct scsi_cmnd *cmd;

while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -1882,9 +1873,7 @@ static void NCR5380_information_transfer
if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);

- cmd->host_scribble = (unsigned char *)
- hostdata->issue_queue;
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
@@ -1918,10 +1907,8 @@ static void NCR5380_information_transfer
case DISCONNECT:{
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->host_scribble = (unsigned char *)
- hostdata->disconnected_queue;
hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
+ list_add(&ncmd->list, &hostdata->disconnected);
dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
cmd, scmd_id(cmd), cmd->device->lun);
@@ -2094,7 +2081,8 @@ static void NCR5380_reselect(struct Scsi
int len;
unsigned char msg[3];
unsigned char *data;
- struct scsi_cmnd *tmp = NULL, *prev;
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;

/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2163,16 +2151,14 @@ static void NCR5380_reselect(struct Scsi
* just reestablished, and remove it from the disconnected queue.
*/

- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)) {
- if (prev) {
- prev->host_scribble = tmp->host_scribble;
- } else {
- hostdata->disconnected_queue =
- (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun) {
+ list_del(&ncmd->list);
+ tmp = cmd;
break;
}
}
@@ -2268,146 +2254,18 @@ static int NCR5380_abort(struct scsi_cmn
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp, **prev;
unsigned long flags;

- scmd_printk(KERN_WARNING, cmd, "aborting command\n");
-
spin_lock_irqsave(&hostdata->lock, flags);

+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
+#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);

- dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
- dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
-
-#if 0
-/*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
-
- if (hostdata->connected == cmd) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no);
-/*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN);
-/*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
-
-/*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
-
- return SUCCESS;
- }
-#endif
-
-/*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
-
- dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no);
- for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- (*prev) = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->result = DID_ABORT << 16;
- dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
-#if (NDEBUG & NDEBUG_ABORT)
- /* KLL */
- else if (prev == tmp)
- printk(KERN_ERR "scsi%d : LOOP\n", instance->host_no);
-#endif
-
-/*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
-
- if (hostdata->connected) {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no);
- return FAILED;
- }
-/*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
-
- if (NCR5380_select(instance, cmd)) {
- spin_unlock_irq(&hostdata->lock);
- return FAILED;
- }
- dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
-
- do_abort(instance);
-
- for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- *prev = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->result = DID_ABORT << 16;
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-/*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
spin_unlock_irqrestore(&hostdata->lock, flags);
- printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
- " before abortion\n", instance->host_no);
+
return FAILED;
}

Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-11-18 19:34:19.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-11-18 19:34:20.000000000 +1100
@@ -175,10 +175,6 @@
* possible) function may be used.
*/

-#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
-#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
-
#define HOSTNO instance->host_no

static int do_abort(struct Scsi_Host *);
@@ -676,8 +672,9 @@ static int __init NCR5380_init(struct Sc
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
hostdata->flags = flags;

INIT_WORK(&hostdata->main_task, NCR5380_main);
@@ -778,7 +775,7 @@ static int NCR5380_queue_command(struct
struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp;
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;

#if (NDEBUG & NDEBUG_NO_WRITE)
@@ -792,12 +789,6 @@ static int NCR5380_queue_command(struct
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */

- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- SET_NEXT(cmd, NULL);
cmd->result = 0;

/*
@@ -831,15 +822,11 @@ static int NCR5380_queue_command(struct
* sense data is only guaranteed to be valid while the condition exists.
*/

- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- NEXT(tmp); tmp = NEXT(tmp))
- ;
- SET_NEXT(tmp, cmd);
- }
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
+
spin_unlock_irqrestore(&hostdata->lock, flags);

dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
@@ -855,8 +842,8 @@ static inline void maybe_release_dma_irq
struct NCR5380_hostdata *hostdata = shost_priv(instance);

/* Caller does the locking needed to set & test these data atomically */
- if (!hostdata->disconnected_queue &&
- !hostdata->issue_queue &&
+ if (list_empty(&hostdata->disconnected) &&
+ list_empty(&hostdata->unissued) &&
!hostdata->connected &&
!hostdata->retain_dma_intr)
NCR5380_release_dma_irq(instance);
@@ -878,7 +865,7 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct NCR5380_cmd *ncmd, *n;
int done;

/*
@@ -897,17 +884,9 @@ static void NCR5380_main(struct work_str
* Search through the issue_queue for a command destined
* for a target that's not busy.
*/
-#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
- tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
- ;
- /*printk("%p ", tmp);*/
- if ((tmp == prev) && tmp)
- printk(" LOOP\n");
- /* else printk("\n"); */
-#endif
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
- prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
+ list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
+ list) {
+ struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
u8 lun = tmp->device->lun;

dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%d\n",
@@ -920,15 +899,10 @@ static void NCR5380_main(struct work_str
!(hostdata->busy[tmp->device->id] & (1 << lun))
#endif
) {
- if (prev) {
- SET_NEXT(prev, NEXT(tmp));
- } else {
- hostdata->issue_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
+ list_del(&ncmd->list);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue %p\n",
- tmp, prev);
+ instance, "main: removed %p from issue queue\n",
+ tmp);

hostdata->retain_dma_intr++;

@@ -957,8 +931,7 @@ static void NCR5380_main(struct work_str
maybe_release_dma_irq(instance);
} else {
/* Need to retry */
- SET_NEXT(tmp, hostdata->issue_queue);
- hostdata->issue_queue = tmp;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
instance, "main: select() failed, %p returned to issue queue\n",
tmp);
@@ -1843,6 +1816,8 @@ static void NCR5380_information_transfer
#endif

while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -2051,8 +2026,7 @@ static void NCR5380_information_transfer
(status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);

- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
@@ -2101,9 +2075,8 @@ static void NCR5380_information_transfer
case DISCONNECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
+ list_add(&ncmd->list, &hostdata->disconnected);
dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
cmd, scmd_id(cmd), cmd->device->lun);
@@ -2297,7 +2270,8 @@ static void NCR5380_reselect(struct Scsi
unsigned char msg[3];
int __maybe_unused len;
unsigned char __maybe_unused *data, __maybe_unused phase;
- struct scsi_cmnd *tmp = NULL, *prev;
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;

/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2388,19 +2362,18 @@ static void NCR5380_reselect(struct Scsi
* just reestablished, and remove it from the disconnected queue.
*/

- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = NEXT(tmp)) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun
#ifdef SUPPORT_TAGS
&& (tag == tmp->tag)
#endif
) {
- if (prev) {
- SET_NEXT(prev, NEXT(tmp));
- } else {
- hostdata->disconnected_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
+ list_del(&ncmd->list);
+ tmp = cmd;
break;
}
}
@@ -2498,188 +2471,18 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp, **prev;
unsigned long flags;

- scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
-
spin_lock_irqsave(&hostdata->lock, flags);

+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
+#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);

- dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
- NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
-#if 1
- /*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
-
- if (hostdata->connected == cmd) {
-
- dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
- /*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
-
- /* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
- /*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
-
- /*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
-
- if (do_abort(instance) == 0) {
- hostdata->connected = NULL;
- cmd->result = DID_ABORT << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- cmd->scsi_done(cmd);
- return SUCCESS;
- } else {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return FAILED;
- }
- }
-#endif
-
- /*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
- for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue),
- tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- (*prev) = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
- HOSTNO);
- /* Tagged queuing note: no tag to free here, hasn't been assigned
- * yet... */
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-
- /*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
-
- if (hostdata->connected) {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
- return FAILED;
- }
-
- /*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
- tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
-
- if (NCR5380_select(instance, cmd)) {
- spin_unlock_irq(&hostdata->lock);
- return FAILED;
- }
- dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
-
- do_abort(instance);
-
- for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
- tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- *prev = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- /* We must unlock the tag/LUN immediately here, since the
- * target goes to BUS FREE and doesn't send us another
- * message (COMMAND_COMPLETE or the like)
- */
-#ifdef SUPPORT_TAGS
- cmd_free_tag(tmp);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
- }
- }
-
- /* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);

- /*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
-
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
-
return FAILED;
}

@@ -2719,16 +2522,18 @@ static int NCR5380_bus_reset(struct scsi
* commands!
*/

- if (hostdata->issue_queue)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted issued command(s)\n");
if (hostdata->connected)
dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
- if (hostdata->disconnected_queue)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected command(s)\n");
-
- hostdata->issue_queue = NULL;
hostdata->connected = NULL;
- hostdata->disconnected_queue = NULL;
+
+ if (!list_empty(&hostdata->unissued))
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted unissued list\n");
+ INIT_LIST_HEAD(&hostdata->unissued);
+
+ if (!list_empty(&hostdata->disconnected))
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected list\n");
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2015-11-18 19:34:19.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2015-11-18 19:34:20.000000000 +1100
@@ -24,6 +24,7 @@

#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/list.h>
#include <linux/workqueue.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
@@ -255,8 +256,8 @@ struct NCR5380_hostdata {
#endif
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
- struct scsi_cmnd *issue_queue; /* waiting to be issued */
- struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
+ struct list_head unissued; /* waiting to be issued */
+ struct list_head disconnected; /* waiting for reconnect */
spinlock_t lock; /* protects this struct */
int flags;
struct scsi_eh_save ses;
@@ -277,6 +278,17 @@ struct NCR5380_hostdata {

#ifdef __KERNEL__

+struct NCR5380_cmd {
+ struct list_head list;
+};
+
+#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
+
+static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
+{
+ return ((struct scsi_cmnd *)ncmd_ptr) - 1;
+}
+
#ifndef NDEBUG
#define NDEBUG (0)
#endif
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2015-11-18 19:34:01.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2015-11-18 19:34:20.000000000 +1100
@@ -208,6 +208,7 @@ static struct scsi_host_template cumanas
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "CumanaSCSI-1",
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int cumanascsi1_probe(struct expansion_card *ec,
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2015-11-18 19:34:12.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2015-11-18 19:34:20.000000000 +1100
@@ -114,6 +114,7 @@ static struct scsi_host_template oakscsi
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2015-11-18 19:34:12.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2015-11-18 19:34:20.000000000 +1100
@@ -780,6 +780,7 @@ static struct scsi_host_template atari_s
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int __init atari_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2015-11-18 19:34:05.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2015-11-18 19:34:20.000000000 +1100
@@ -61,6 +61,7 @@ static struct scsi_host_template dmx3191
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int dmx3191d_probe_one(struct pci_dev *pdev,
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2015-11-18 19:34:05.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2015-11-18 19:34:20.000000000 +1100
@@ -452,5 +452,6 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2015-11-18 19:34:12.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2015-11-18 19:34:20.000000000 +1100
@@ -729,6 +729,7 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};

#include "scsi_module.c"
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2015-11-18 19:34:05.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2015-11-18 19:34:20.000000000 +1100
@@ -323,6 +323,7 @@ static struct scsi_host_template mac_scs
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int __init mac_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2015-11-18 19:34:05.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2015-11-18 19:34:20.000000000 +1100
@@ -562,6 +562,7 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2015-11-18 19:34:12.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2015-11-18 19:34:20.000000000 +1100
@@ -468,6 +468,7 @@ static struct scsi_host_template sun3_sc
.sg_tablesize = SG_NONE,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};

static int __init sun3_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2015-11-18 19:34:05.000000000 +1100
+++ linux/drivers/scsi/t128.c 2015-11-18 19:34:20.000000000 +1100
@@ -406,5 +406,6 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"



\
 
 \ /
  Last update: 2015-11-18 10:01    [W:0.340 / U:15.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site