lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT
Date
Add I2C support to the Broadcom Northstar Plus Device Tree.  Since no
driver changes are needed to enable this hardware, only the device tree
changes are required to make this functional.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7335a74..b74438c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -217,5 +217,14 @@

brcm,nand-has-wp;
};
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
};
};
--
1.9.1


\
 
 \ /
  Last update: 2015-11-17 21:21    [W:0.058 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site