lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] MIPS: ath79: Move the IRQ drivers to drivers/irqchip
Date
Hi all,

A first round of cleanup on the IRQ code to move most of it to
drivers/irqchip. After this the handlers for the cascaded interrupts on the
ar934x and qca955x is the only IRQ code left in the platform directory.
For these two a new driver must be written first.

Alban

Alban Bedel (6):
MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsi
MIPS: ath79: irq: Remove useless #ifdef CONFIG_IRQCHIP
MIPS: ath79: irq: Prepare moving the MISC driver to drivers/irqchip
MIPS: ath79: irq: Move the MISC driver to drivers/irqchip
MIPS: ath79: Allow using ath79_ddr_wb_flush() from drivers
MIPS: ath79: irq: Move the CPU IRQ driver to drivers/irqchip

arch/mips/ath79/common.h | 1 -
arch/mips/ath79/irq.c | 249 +++----------------------------
arch/mips/boot/dts/qca/ar9132.dtsi | 2 +-
arch/mips/include/asm/mach-ath79/ath79.h | 5 +
drivers/irqchip/Makefile | 2 +
drivers/irqchip/irq-ath79-cpu.c | 97 ++++++++++++
drivers/irqchip/irq-ath79-misc.c | 182 ++++++++++++++++++++++
7 files changed, 308 insertions(+), 230 deletions(-)
create mode 100644 drivers/irqchip/irq-ath79-cpu.c
create mode 100644 drivers/irqchip/irq-ath79-misc.c

--
2.0.0



\
 
 \ /
  Last update: 2015-11-17 21:01    [W:0.067 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site