lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] drm: support hotspot for universal plane cursors
On Tue, Nov 17, 2015 at 03:59:43PM +0000, John Keeping wrote:
> On Tue, 17 Nov 2015 17:39:32 +0200, Ville Syrjälä wrote:
>
> > On Tue, Nov 17, 2015 at 03:05:34PM +0000, John Keeping wrote:
> > > The request's hot_x and hot_y are set correctly for both
> > > DRM_IOCTL_MODE_CURSOR and DRM_IOCTL_MODE_CURSOR2 so we just need to
> > > save the values and then apply the offset to the cursor plane when
> > > the cursor moves.
> > >
> > > Signed-off-by: John Keeping <john@metanate.com>
> > > ---
> > > v2:
> > > - add kerneldoc for hot_x and hot_y in struct drm_crtc
> > >
> > > drivers/gpu/drm/drm_crtc.c | 11 +++++++----
> > > include/drm/drm_crtc.h | 6 ++++++
> > > 2 files changed, 13 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > index 720a153..40f5b84 100644
> > > --- a/drivers/gpu/drm/drm_crtc.c
> > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > @@ -2831,6 +2831,9 @@ static int drm_mode_cursor_universal(struct
> > > drm_crtc *crtc, DRM_DEBUG_KMS("failed to wrap cursor buffer in drm
> > > framebuffer\n"); return PTR_ERR(fb);
> > > }
> > > +
> > > + crtc->hot_x = req->hot_x;
> > > + crtc->hot_y = req->hot_y;
> > > } else {
> > > fb = NULL;
> > > }
> > > @@ -2841,11 +2844,11 @@ static int drm_mode_cursor_universal(struct
> > > drm_crtc *crtc, }
> > >
> > > if (req->flags & DRM_MODE_CURSOR_MOVE) {
> > > - crtc_x = req->x;
> > > - crtc_y = req->y;
> > > + crtc_x = req->x - crtc->hot_x;
> > > + crtc_y = req->y - crtc->hot_y;
> > > } else {
> > > - crtc_x = crtc->cursor_x;
> > > - crtc_y = crtc->cursor_y;
> > > + crtc_x = crtc->cursor_x - crtc->hot_x;
> > > + crtc_y = crtc->cursor_y - crtc->hot_y;
> >
> > Why does the location of the hotspot affect the plane position?
>
> hot_{x,y} specify the location of the active pixel within the cursor
> plane and cursor_{x,y} specify the location of the active pixel on the
> display

Does it? Impossible to say without docs, or some reference to the
canonical implementation. Looking at the logs, I guess qxl was the
first to get hotspot support. Unfortunately looking at the qxl driver
isn't much help. But at leeast it seems to just pass the x/y and
hot_x/y straight through without offsetting anything.

> so we need to offset the plane position in order for the active
> pixel to be in the correct place.
>
> > > }
> > >
> > > if (fb) {
> > > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> > > index 3f0c690..2be4414 100644
> > > --- a/include/drm/drm_crtc.h
> > > +++ b/include/drm/drm_crtc.h
> > > @@ -404,6 +404,8 @@ struct drm_crtc_funcs {
> > > * @cursor: cursor plane for this CRTC
> > > * @cursor_x: current x position of the cursor, used for universal
> > > cursor planes
> > > * @cursor_y: current y position of the cursor, used for universal
> > > cursor planes
> > > + * @hot_x: x-coordinate of cursor hotspot, used for universal
> > > cursor planes
> > > + * @hot_y: y-coordinate of cursor hotspot, used for universal
> > > cursor planes
> > > * @enabled: is this CRTC enabled?
> > > * @mode: current mode timings
> > > * @hwmode: mode timings as programmed to hw regs
> > > @@ -445,6 +447,10 @@ struct drm_crtc {
> > > int cursor_x;
> > > int cursor_y;
> > >
> > > + /* hotspot of cursor */
> > > + int hot_x;
> > > + int hot_y;
> > > +
> > > bool enabled;
> > >
> > > /* Requested mode from modesetting. */
> > > --
> > > 2.6.3.462.gbe2c914
> > >
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > http://lists.freedesktop.org/mailman/listinfo/dri-devel
> >

--
Ville Syrjälä
Intel OTC


\
 
 \ /
  Last update: 2015-11-17 17:21    [W:0.100 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site