lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/5] mfd: syscon: add a DT property to set value width
Looks like you forgot to Cc Arnd too.

Doing that for you now.

On Tue, 17 Nov 2015, Lee Jones wrote:
> On Mon, 16 Nov 2015, Damien Riegel wrote:
>
> > Currently syscon has a fixed configuration of 32 bits for register and
> > values widths. In some cases, it would be desirable to be able to
> > customize the value width.
> >
> > For example, certain boards (like the ones manufactured by Technologic
> > Systems) have a FPGA that is memory-mapped, but its registers are only
> > 16-bit wide.
> >
> > This patch adds an optional "bus-width" DT binding for syscon that
> > allows to change the width for the data bus (i.e. val_bits). If this
> > property is provided, it will also adjust the register stride to
> > bus-width / 8. If not provided, the default configuration is used.
> >
> > Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> > ---
> > Documentation/devicetree/bindings/mfd/syscon.txt | 3 +++
> > drivers/mfd/syscon.c | 12 ++++++++++++
> > 2 files changed, 15 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
> > index fe8150b..4c9d187 100644
> > --- a/Documentation/devicetree/bindings/mfd/syscon.txt
> > +++ b/Documentation/devicetree/bindings/mfd/syscon.txt
> > @@ -13,6 +13,9 @@ Required properties:
> > - compatible: Should contain "syscon".
> > - reg: the register region can be accessed from syscon
> >
> > +Optional property:
> > +- bus-width: width of the data bus. Can be <8>, <16>, <32>, or <64>.
> > +
> > Examples:
> > gpr: iomuxc-gpr@020e0000 {
> > compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
> > diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> > index 176bf0f..00b0995 100644
> > --- a/drivers/mfd/syscon.c
> > +++ b/drivers/mfd/syscon.c
> > @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
> > struct syscon *syscon;
> > struct regmap *regmap;
> > void __iomem *base;
> > + u32 bus_width;
> > int ret;
> > struct regmap_config syscon_config = syscon_regmap_config;
> >
> > @@ -69,6 +70,17 @@ static struct syscon *of_syscon_register(struct device_node *np)
> > else if (of_property_read_bool(np, "little-endian"))
> > syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
> >
> > + ret = of_property_read_u32(np, "bus-width", &bus_width);
> > + if (!ret) {
>
> This syntax is confusing, as we normally associate it with an error
> condition. Instead, I'd use:
>
> if (of_property_read_u32(np, "bus-width", &bus_width) == 0)
>
> Or, for more clarity:
>
> of_property_read_u32(np, "bus-width", &bus_width);
> if (bus_width)
>
> If you choose this version (which I think is my preferred method, don't
> forget to initialise 'bus_width' to zero.
>
> > + /*
> > + * the property has been provided, regmap_init_mmio
> > + * will return an error if these values are invalid
> > + * so there is no need to check them here.
> > + */
> > + syscon_config.val_bits = bus_width;
> > + syscon_config.reg_stride = syscon_config.val_bits / 8;
> > + }
> > +
> > regmap = regmap_init_mmio(NULL, base, &syscon_config);
> > if (IS_ERR(regmap)) {
> > pr_err("regmap init failed\n");
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-11-17 10:41    [W:0.108 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site