lkml.org 
[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] MIPS: ath79: Add USB support on the TL-WR1043ND
Date
Hi,

First re-roll of this patch series to add a driver for the USB phy
on ATH79 SoCs. As suggested in the previous series this new version
include a generic driver for simple phys which is re-used for the
ATH79 driver. This generic driver should be useful for all kind of
phys that don't need any configuration.

Alban

Alban Bedel (5):
phy: Add a driver for simple phy
devicetree: Add bindings for the ATH79 USB phy
phy: Add a driver for the ATH79 USB phy
MIPS: ath79: Add the EHCI controller and USB phy to the AR9132 dtsi
MIPS: ath79: Enable the USB port on the TL-WR1043ND

.../devicetree/bindings/phy/phy-ath79-usb.txt | 18 ++
MAINTAINERS | 8 +
arch/mips/boot/dts/qca/ar9132.dtsi | 26 +++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 8 +
drivers/phy/Kconfig | 20 ++
drivers/phy/Makefile | 2 +
drivers/phy/phy-ath79-usb.c | 116 ++++++++++++
drivers/phy/phy-simple.c | 204 +++++++++++++++++++++
include/linux/phy/simple.h | 39 ++++
9 files changed, 441 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
create mode 100644 drivers/phy/phy-ath79-usb.c
create mode 100644 drivers/phy/phy-simple.c
create mode 100644 include/linux/phy/simple.h

--
2.0.0



\
 
 \ /
  Last update: 2015-11-16 22:41    [W:0.204 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site