lkml.org 
[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] comedi: dmm32at: Fix coding style - use BIT macro
Date
BIT macro is used for defining BIT location instead of
shifting operator, usleep_range is preferred over
udelay - coding style issue

Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
---
drivers/staging/comedi/drivers/dmm32at.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index d312fda..9f8c9eb 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -508,7 +508,7 @@ static int dmm32at_reset(struct comedi_device *dev)
outb(DMM32AT_CTRL_RESETA, dev->iobase + DMM32AT_CTRL_REG);

/* allow a millisecond to reset */
- udelay(1000);
+ usleep_range(1000, 1050);

/* zero scan and fifo control */
outb(0x0, dev->iobase + DMM32AT_FIFO_CTRL_REG);
@@ -524,7 +524,7 @@ static int dmm32at_reset(struct comedi_device *dev)
outb(DMM32AT_RANGE_U10, dev->iobase + DMM32AT_AI_CFG_REG);

/* should take 10 us to settle, here's a hundred */
- udelay(100);
+ usleep_range(100, 150);

/* read back the values */
ailo = inb(dev->iobase + DMM32AT_AI_LO_CHAN_REG);
--
1.7.10.4


\
 
 \ /
  Last update: 2015-11-16 18:21    [W:0.016 / U:10.652 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site