[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 00/32] HiSilicon SAS driver
This is the driver patchset for the HiSilicon SAS driver. The driver
is a platform driver.

The driver will support multiple revisions of HW. Currently only "v1"
HW is supported.

The driver uses libsas framework within the SCSI framework.

The v1 HW supports SSP and SMP, but not STP/SATA.

Differences to v3:
- update dt bindings for syscon property
- change SAS and SCSI deregister order
- remove unused phy struct elements

Differences to v2:
- update device tree bindings
- remove while loops when evaluating hba struct
- remove _lo and _hi DMA struct fields
- revised spinlock usage
- fix error handling for when CMPLT_HDR_ERR_RCRD_XFRD set
- general coding style and cosmetic fixes

Differences to v1:
- re-arch driver into main module and hw-specific driver module
- allocate hisi_hba in scsi_host_alloc
- use of_irq_count get irq count - depends on [1]
- use syscon to handle ctrl reg access
- get SAS address from device tree
- do not set cmd_per_lun to 1
- remove remove controller id
- use static wq in phy struct
- process control phy in caller context
- fix port->port_attached issue for rmmod


John Garry (32):
[SCSI] sas: centralise ssp frame information units
devicetree: bindings: scsi: HiSi SAS
scsi: hisi_sas: add initial bare main driver
scsi: hisi_sas: add scsi host registration
scsi: hisi_sas: scan device tree
scsi: hisi_sas: add HW DMA structures
scsi: hisi_sas: allocate memories and create pools
scsi: hisi_sas: add hisi_sas_remove
scsi: hisi_sas: add slot init code
scsi: hisi_sas: add cq structure initialization
scsi: hisi_sas: add phy SAS ADDR initialization
scsi: hisi_sas: set dev DMA mask
scsi: hisi_sas: add hisi_hba workqueue
scsi: hisi_sas: add hisi sas device type
scsi: hisi_sas: add phy and port init
scsi: hisi_sas: add timer and spinlock init
scsi: hisi_sas: add v1 hw module init
scsi: hisi_sas: add v1 hardware register definitions
scsi: hisi_sas: add v1 HW initialisation code
scsi: hisi_sas: add v1 hw interrupt init
scsi: hisi_sas: add path from phyup irq to SAS framework
scsi: hisi_sas: add ssp command function
scsi: hisi_sas: add cq interrupt handler
scsi: hisi_sas: add dev_found and dev_gone
scsi: hisi_sas: add abnormal irq handler
scsi: hisi_sas: add bcast interrupt handler
scsi: hisi_sas: add smp protocol support
scsi: hisi_sas: add scan finished and start
scsi: hisi_sas: add tmf methods
scsi: hisi_sas: add control phy handler
scsi: hisi_sas: add fatal irq handler
MAINTAINERS: add maintainer for HiSi SAS driver

.../devicetree/bindings/scsi/hisilicon-sas.txt | 69 +
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/aic94xx/aic94xx_sas.h | 49 +-
drivers/scsi/hisi_sas/Kconfig | 6 +
drivers/scsi/hisi_sas/Makefile | 2 +
drivers/scsi/hisi_sas/hisi_sas.h | 345 ++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 1362 ++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1866 ++++++++++++++++++++
include/scsi/sas.h | 74 +
11 files changed, 3739 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
create mode 100644 drivers/scsi/hisi_sas/Kconfig
create mode 100644 drivers/scsi/hisi_sas/Makefile
create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c


 \ /
  Last update: 2015-11-16 14:21    [W:0.114 / U:4.456 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site