lkml.org 
[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] misc: eeprom: 93xx46: Add DT binding for a GPIO 'select' line.
Date
This commit documents an additional devicetree binding in the
eeprom_93x46 driver allowing a GPIO line to function as a 'select'
or 'enable' signal prior to accessing the EEPROM.

Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
---
Documentation/devicetree/bindings/misc/eeprom-93xx46.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
index 34a0cc2..75b16f4 100644
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
@@ -6,6 +6,8 @@ Required properties:

Optional properties:
- read-only : parameter-less property which disables writes to the EEPROM
+- select-gpio : if present, specifies the GPIO that will be asserted prior to
+ each access to the EEPROM (e.g. for SPI bus multiplexing)

Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
apply. In particular, "reg" and "spi-max-frequency" properties must be given.
@@ -17,4 +19,5 @@ Example:
spi-max-frequency = <1000000>;
spi-cs-high;
data-size = <8>;
+ select-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
};
--
2.4.10


\
 
 \ /
  Last update: 2015-11-17 05:41    [W:0.088 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site