lkml.org 
[lkml]   [2015]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arm: boot: dts: beaglex15: Remove ID GPIO
Date
According to latest schematics [1], this board
leaves ID pin floating. It's not connected to
anything at all.

So let's remove it.

[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 --
1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 00352e761b8c..6f3a1a7ec5f9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -560,8 +560,6 @@
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
- ti,enable-id-detection;
- id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
};

};
--
2.6.2


\
 
 \ /
  Last update: 2015-11-12 19:21    [W:0.120 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site