Messages in this thread Patch in this message | | | From | Felipe Balbi <> | Subject | [PATCH 2/2] arm: boot: beaglex15: pass correct interrupt | Date | Thu, 12 Nov 2015 11:53:01 -0600 |
| |
According to latest schematics [1], GPIO_1/VBUSDET on TPS659038 is tied to AM57x GPIO4_21. We can use that as a VBUS interrupt, instead of relying on PMIC's VBUS interrupts which don't seem to be firing on x15 at all.
A follow up patch will add support for using this GPIO-based interrupt mechanism for notifying about VBUS.
[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf
Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 6f3a1a7ec5f9..5e47162f7883 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -560,6 +560,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; }; }; -- 2.6.2
| |