lkml.org 
[lkml]   [2015]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 2/5] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
On Wed, Nov 11, 2015 at 08:10:55AM +0530, Viresh Kumar wrote:
> Depending on the version of hardware or its properties, which are only
> known at runtime, various properties of the OPP can change. For example,
> an OPP with frequency 1.2 GHz, may have different voltage/current
> requirements based on the version of the hardware it is running on.
>
> In order to not replicate the same OPP tables for varying values of all
> such fields, this commit introduces the concept of opp-property-<name>.
> The <name> can be chosen by the platform at runtime, and OPPs will be
> initialized depending on that name string. Currently support is extended
> for the following properties:
> - opp-microvolt-<name>
> - opp-microamp-<name>
>
> If the name string isn't provided by the platform, or if it is provided
> but doesn't match the properties present in the OPP node, we will fall
> back to the original properties without the -<name> string, if they are
> available.
>
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> Documentation/devicetree/bindings/opp/opp.txt | 47 +++++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> index d072fa0ffbd4..a3e7f0d5e1fb 100644
> --- a/Documentation/devicetree/bindings/opp/opp.txt
> +++ b/Documentation/devicetree/bindings/opp/opp.txt
> @@ -100,6 +100,14 @@ properties.
> Entries for multiple regulators must be present in the same order as
> regulators are specified in device's DT node.
>
> +- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
> + the above opp-microvolt property, but allows multiple voltage ranges to be
> + provided for the same OPP. At runtime, the platform can pick a <name> and
> + matching opp-microvolt-<name> property will be enabled for all OPPs. If the
> + platform doesn't pick a specific <name> or the <name> doesn't match with any
> + opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
> + present.
> +
> - opp-microamp: The maximum current drawn by the device in microamperes
> considering system specific parameters (such as transients, process, aging,
> maximum operating temperature range etc.) as necessary. This may be used to
> @@ -112,6 +120,9 @@ properties.
> for few regulators, then this should be marked as zero for them. If it isn't
> required for any regulator, then this property need not be present.
>
> +- opp-microamp-<name>: Named opp-microamp property. Similar to
> + opp-microvolt-<name> property, but for microamp instead.
> +
> - clock-latency-ns: Specifies the maximum possible transition latency (in
> nanoseconds) for switching to this OPP from any other OPP.
>
> @@ -528,3 +539,39 @@ Example 6: opp-supported-hw
> };
> };
> };
> +
> +Example 7: opp-microvolt-<name>, opp-microamp-<name>:
> +(example: device with two possible microvolt ranges: slow and fast)
> +
> +/ {
> + cpus {
> + cpu@0 {
> + compatible = "arm,cortex-a7";
> + ...
> +
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> + };
> +
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {

Thought we are doing frequency for unit address here.

> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt-slow = <900000 915000 925000>;
> + opp-microvolt-fast = <970000 975000 985000>;
> + opp-microamp-slow = <70000>;
> + opp-microamp-fast = <71000>;
> + };
> +
> + opp01 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
> + <910000 925000 935000>; /* Supply vcc1 */
> + opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
> + <960000 965000 975000>; /* Supply vcc1 */
> + opp-microamp = <70000>; /* Will be used for both slow/fast */
> + };
> + };
> +};
> --
> 2.6.2.198.g614a2ac
>


\
 
 \ /
  Last update: 2015-11-11 22:01    [W:0.051 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site