lkml.org 
[lkml]   [2015]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] mmc: sdhci at91: add PM support
From
On 10 November 2015 at 11:36, Ludovic Desroches
<ludovic.desroches@atmel.com> wrote:
> Add runtime PM support and use runtime_force_suspend|resume() for system
> PM.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> ---
>
> Changes:
> - from v1: take a runtime PM centric approach
>
> drivers/mmc/host/sdhci-of-at91.c | 66 +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 06d0b50..5dbe0ce 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -21,6 +21,8 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
>
> #include "sdhci-pltfm.h"
>
> @@ -51,6 +53,62 @@ static const struct of_device_id sdhci_at91_dt_match[] = {
> {}
> };
>
> +#ifdef CONFIG_PM
> +static int sdhci_at91_runtime_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct sdhci_host *host = platform_get_drvdata(pdev);

These two lines can be replaced by:
struct sdhci_host *host = dev_get_drvdata(dev);

> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_at91_priv *priv = pltfm_host->priv;
> + int ret;
> +
> + ret = sdhci_runtime_suspend_host(host);
> +
> + clk_disable_unprepare(priv->gck);
> + clk_disable_unprepare(priv->hclock);
> + clk_disable_unprepare(priv->mainck);
> +
> + return ret;
> +}
> +
> +static int sdhci_at91_runtime_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct sdhci_host *host = platform_get_drvdata(pdev);

Same comment as above.

> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_at91_priv *priv = pltfm_host->priv;
> + int ret;
> +
> + ret = clk_prepare_enable(priv->mainck);
> + if (ret) {
> + dev_err(dev, "can't enable mainck\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->hclock);
> + if (ret) {
> + dev_err(dev, "can't enable hclock\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->gck);
> + if (ret) {
> + dev_err(dev, "can't enable gck\n");
> + return ret;
> + }
> +
> + return sdhci_runtime_resume_host(host);
> +}
> +#endif /* CONFIG_PM_RUNTIME */

/s/CONFIG_PM_RUNTIME/CONFIG_PM

> +
> +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
> + sdhci_at91_runtime_resume,
> + NULL)
> +};
> +
> static int sdhci_at91_probe(struct platform_device *pdev)
> {
> const struct of_device_id *match;
> @@ -148,6 +206,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
> if (ret)
> goto clocks_disable_unprepare;
>
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> + pm_runtime_use_autosuspend(&pdev->dev);

Move these four runtime PM calls above sdhci_add_host(), as after that
point the host is used and thus runtime PM operations starts.

> +
> return 0;
>
> clocks_disable_unprepare:
> @@ -165,6 +228,7 @@ static int sdhci_at91_remove(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_at91_priv *priv = pltfm_host->priv;
>

Add:
pm_runtime_get_sync();

> + pm_runtime_disable(&pdev->dev);

Add:
pm_runtime_put_noidle();

> sdhci_pltfm_unregister(pdev);
>
> clk_disable_unprepare(priv->gck);
> @@ -178,7 +242,7 @@ static struct platform_driver sdhci_at91_driver = {
> .driver = {
> .name = "sdhci-at91",
> .of_match_table = sdhci_at91_dt_match,
> - .pm = SDHCI_PLTFM_PMOPS,
> + .pm = &sdhci_at91_dev_pm_ops,
> },
> .probe = sdhci_at91_probe,
> .remove = sdhci_at91_remove,
> --
> 2.5.0
>

Otherwise, this looks good!

Kind regards
Uffe


\
 
 \ /
  Last update: 2015-11-10 12:41    [W:0.058 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site