lkml.org 
[lkml]   [2015]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4] ARM: configs: Add Freescale LS1021A defconfig
Date
> On Tuesday 27 October 2015 14:40:21 Huan Wang wrote:
> > >
> > > Ok. What I was suggesting above though was to try to pinpoint
> > > exactly where it goes wrong. You have verified that it does not
> > > crash before the page tables are enabled, but that is very early.
> > > You have also shown that the kernel crashes before the point at
> > > which the 'Booting Linux on physical CPU 0xf00' message is printed
> > > to the kernel, but that is *much*
> > > later: setup_arch() calls parse_early_param(), which in turn sets up
> > > early_console_write(). This means the 'Booting Linux on physical CPU
> > > 0xf00'
> > > is still stuck in the log buffer and you may have crashed someone
> > > inbetween.
> > >
> > > If you can call printascii(), you can try to do that just after
> > > enabling the page tables to see if that was the problem like you
> > > suspect, or otherwise add more printascii() statements between
> > > __turn_mmu_on and
> > > parse_early_param() to pinpoint the exact code that breaks.
> > [Alison Wang] Thank you very much for your help. The issue is fixed.
> >
>
> Ah, very good. I'm curious what caused the problem in the end.
[Alison Wang] The problem is caused by the wrong fdt_high setting (0xcfffffff).
When 3G/1G user/kernel memory split is used, U-Boot relocates the device tree
blob into high memory when booting the kernel and the kernel is unable to access
the blob.

Best Regards,
Alison Wang


\
 
 \ /
  Last update: 2015-11-02 04:41    [W:0.235 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site