lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
Date

This cosmetic patch reorder nodes under internal-regs by increasing
address order, as epxected.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
---
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
1 file changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 85b2f87c0b8a..d72a69d97ba2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -94,54 +94,11 @@
status = "disabled";
};

- /* Two rear eSATA ports */
- sata@a0000 {
- nr-ports = <2>;
- status = "okay";
- };
-
- serial@12000 {
- status = "okay";
- };
-
- mdio {
- phy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 { /* Marvell 88E1318 */
- reg = <1>;
- };
- };
-
- ethernet@70000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-
- ethernet@74000 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
- };
-
- /* Front USB 2.0 port */
- usb@50000 {
- status = "okay";
- };
-
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
clock-frequency = <400000>;
status = "okay";

- isl12057: isl12057@68 {
- compatible = "isil,isl12057";
- reg = <0x68>;
- isil,irq2-can-wakeup-machine;
- };
-
/* Controller for rear fan #1 of 3 (Protechnic
* MGT4012XB-O20, 8000RPM) near eSATA port */
g762_fan1: g762@3e {
@@ -178,6 +135,49 @@
compatible = "gmt,g751";
reg = <0x4c>;
};
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ /* Two rear eSATA ports */
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
};

nand@d0000 {
--
2.5.3


\
 
 \ /
  Last update: 2015-10-10 00:41    [W:0.049 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site