lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver
On Tue, Oct 06, 2015 at 05:25:16PM -0300, Fabio Estevam wrote:
> On Tue, Oct 6, 2015 at 3:54 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
>
> > Make sure you have the ALSA config file, as alsalib won't get on
> > with dw-hdmi only accepting 24-bit audio without this. A copy is
> > attached. It also tells ALSA how to deal with multi-channel audio
> > as well.
>
> Thanks, Russell!
>
> Got audio to play on my HDMI TV :-)
>
> For the entire series:
>
> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

Just to confirm - that's for _all_ of these 8 patches, including the
changes to the ACR code in the last four patches, and you're happy that
I send all of these:

drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: replace CTS calculation for the ACR

--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-10-09 18:21    [W:0.168 / U:1.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site