lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/7] arm64: berlin: add pinctrl support
Date
This series adds support for Marvell berlin4ct pin-controller, allowing
to configure the pin muxing from the device tree.

Since v4:
- drop ARCH_BERLIN dependency for it has been met
- drop COMPILE_TEST dependency but make berlin pinctrl driver visible
if COMPILE_TEST=y, and let this change be a seperate commit.

Since v3:
- fix stupid build error: I missed local changes to berlin-bg4ct.c

Since v2:
- introduce new berlin_pinctrl_probe_regmap() to avoid duplicated code
- renaming such as s/urt/uart etc. but keep the group name as URT* to keep
consistent with HW/ASIC

Since v1:
- use generic name for pin functions
- a new commit to add pinmux for uart0
- correct pinctrl usage in dts


Jisheng Zhang (7):
pinctrl: berlin: introduce berlin_pinctrl_probe_regmap()
pinctrl: berlin: Make berlin pinctrl driver visible if COMPILE_TEST=y
pinctrl: berlin: add the berlin4ct pinctrl driver
arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
pinctrl: dt-binding: document berlin4ct SoC pinctrl
arm64: dts: berlin4ct: add the pinctrl node
arm64: dts: berlin4ct: add default pinmux for uart0

.../devicetree/bindings/pinctrl/berlin,pinctrl.txt | 5 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 22 +
drivers/pinctrl/berlin/Kconfig | 7 +-
drivers/pinctrl/berlin/Makefile | 1 +
drivers/pinctrl/berlin/berlin-bg4ct.c | 503 +++++++++++++++++++++
drivers/pinctrl/berlin/berlin.c | 26 +-
drivers/pinctrl/berlin/berlin.h | 4 +
8 files changed, 558 insertions(+), 11 deletions(-)
create mode 100644 drivers/pinctrl/berlin/berlin-bg4ct.c

--
2.6.1



\
 
 \ /
  Last update: 2015-10-09 14:21    [W:0.072 / U:7.900 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site