lkml.org 
[lkml]   [2015]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] cpufreq, intel_pstate, set max_sysfs_pct and min_sysfs_pct on governor switch


On 10/07/2015 06:26 PM, Doug Smythies wrote:
> On 2015.10.07 15:06 Rafael J. Wysocki wrote:
>> On Wednesday, October 07, 2015 05:31:25 PM Prarit Bhargava wrote:
>>> On 10/07/2015 02:52 PM, Doug Smythies wrote:
>>>> On 2015.10.07 08:46 Prarit Bhargava wrote:
>>>>> On 10/07/2015 11:40 AM, Doug Smythies wrote:
>>>>>>
>>>>>> Do we agree or disagree that the root issue seems to be (from your test)?:
>>>>>>
>>>>>> \# echo 100 > /sys/devices/system/cpu/intel_pstate/min_perf_pct
>>>>>>
>>>>>> [ 21.483436] store_min_perf_pct[453] min_sysfs_pct = 100
>>>>>> [ 21.489373] store_min_perf_pct[456] min_perf_pct = 100
>>>>>> [ 21.495203] store_min_perf_pct[459] min_perf_pct = 100
>>>>>> [ 21.501050] store_min_perf_pct[462] min_perf_pct = 100
>>>>>
>>>>> Yep, and it appears to be done by default in Fedora & RHEL :/ ... the issue is
>>>>> still the same IMO that min_sysfs_pct & max_sysfs_pct are not cleared on a
>>>>> governor switch.
>>>>
>>>> Clearing them will break some other things. For example, and as
>>>> shown in my original reply, resume from suspend.
>>>>
>>>> Why? Because, at least on my computer, the governor is changed to
>>>> "performance" during suspend, and the "powersave" governor is
>>>> restored sometime during resume. The users wants the settings they had
>>>> before the suspend.
>>>>
>>> Looking at this in more detail after having tested on a Intel(R) Core(TM)
>>> i7-2600 CPU @ 3.40GHz in Fedora and RHEL.
>>>
>>> I have a feeling that the switch you're seeing (poweersave->performance, suspend
>>> ... resume, performance->powersave) is occurring in userspace, and not as a
>>> result of the kernel.
> Agreed. It is pm-suspend doing it.
>
>>> IMO if userspace changes the governor, all bets are off
>>> on maintaining max_sysfs_pct and min_sysfs_pct.
>>>
>>> Here's something I cannot figure out (because I do not have an Ubuntu install).
>>> *Why* is Ubuntu making the governor switch during suspend/resume? Is it
>>> because of archaic brokeness they were trying to paper over?
>
>>> That's not limited to Ubuntu, pm-utils has been doing that forever.
>
> Agreed. This in pm-utils, and not limited to Ubuntu.
> We can ignore this issue if everyone wants, but I can envision bug reports.
>
>> I have no idea why has it been doing that, though. I guess the reason
>> was to "speed up" PM transitions (in case it started when you were in a
>> low-frequency P-state and then there was no time to bump it up before
>> things got too far).
>
> I have no idea either, but the stated theory seems sound.

Doug, can you also apply (sorry for the cut-and-paste)

diff --git a/pm/sleep.d/94cpufreq b/pm/sleep.d/94cpufreq
index 6807681..2c83e8e 100755
--- a/pm/sleep.d/94cpufreq
+++ b/pm/sleep.d/94cpufreq
@@ -16,6 +16,8 @@ hibernate_cpufreq()
gov="$x/cpufreq/scaling_governor"
# if we do not have a scaling_governor file, skip.
[ -f "$gov" ] || continue
+ # Is the governor known to work?
+ [ "$gov" == "intel_pstate" ] && continue
# if our temporary governor is not available, skip.
grep -q "$TEMPORARY_CPUFREQ_GOVERNOR" \
"$x/cpufreq/scaling_available_governors" || continue
and re-test?

Thanks,

P.
>
>


\
 
 \ /
  Last update: 2015-10-08 02:21    [W:0.098 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site