lkml.org 
[lkml]   [2015]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] ARM: dts: sunxi: Add regulators for LeMaker BananaPi
Date
"Timo Sigurdsson" <public_timo.s@silentcreek.de> writes:

> Kevin Hilman schrieb am 24.09.2015 19:57:
>> kernelci.org started finding boot faiulres[1] on bananapi linux-next
>> around next-20150918, but it was only failing in some labs and not
>> others. I finally bisected it down to this patch, which landed in
>> linux-next in the form of 2d665a8a8350 ARM: dts: sunxi: Add regulators
>> for LeMaker BananaPi. Reverting that commit on top of next-20150923
>> gets my bananapi booting again.
>>
>> Note it's kind of an interesting boot failure. The kernel boots fully
>> to a shell, but panics after running a few commands. In particular
>> 'dmesg -n1' seems to trigger it usually[2].
>>
>> Kevin
>>
>> [1]
>> http://kernelci.org/boot/sun7i-a20-bananapi/job/next/kernel/next-20150923/defconfig/multi_v7_defconfig/lab/lab-khilman/?_id=5602504359b514be146c326f
>> [2]
>> http://storage.kernelci.org/next/next-20150923/arm-multi_v7_defconfig/lab-khilman/boot-sun7i-a20-bananapi.html
>
> following up on my last email: I'm back from my vacation and I tried to
> reproduce your problem, but my board doesn't seem to be affected, so I
> cannot trigger it.
>
> I still think that the lower voltages may be the cause of your problem
> with that specific board, so could you please test the attached patch on
> top of my patch that you first experienced the problem with? Please let
> us know whether this solves your issue or whether we need to dig deeper.

Thanks for the patch. Looks like it's the OPPs.

I went back to next-20150923 and verified it still fails. Then, I
applied your patch and saw that it boots just fine.

Kevin


\
 
 \ /
  Last update: 2015-10-07 17:01    [W:0.619 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site