lkml.org 
[lkml]   [2015]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] misc: eeprom: at25: add Cypress FRAM functionality
Date
This patch adds functionality for Cypress FRAMs on SPI bus, such as FM25V05,
FM25V10 etc.
Added to at25 driver:
- reading device ID and choose size and addr len from it
- serial number reading and exporting it to sysfs
- new compatible string

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
drivers/misc/eeprom/Kconfig | 5 +-
drivers/misc/eeprom/at25.c | 209 +++++++++++++++++++++++++++++++++++++++-----
2 files changed, 192 insertions(+), 22 deletions(-)

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 04f2e1f..99c7cff 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -28,10 +28,11 @@ config EEPROM_AT24
will be called at24.

config EEPROM_AT25
- tristate "SPI EEPROMs from most vendors"
+ tristate "SPI EEPROMs (FRAMs) from most vendors"
depends on SPI && SYSFS
help
- Enable this driver to get read/write support to most SPI EEPROMs,
+ Enable this driver to get read/write support to most SPI EEPROMs
+ and Cypress FRAMs,
after you configure the board init code to know about each eeprom
on your target board.

diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 0a1af93..60d1d39 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -1,5 +1,6 @@
/*
* at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
+ * and Cypress FRAMs FM25 models
*
* Copyright (C) 2006 David Brownell
*
@@ -19,6 +20,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/property.h>
+#include <linux/of.h>
+#include <linux/of_device.h>

/*
* NOTE: this is an *EEPROM* driver. The vagaries of product naming
@@ -34,6 +37,7 @@ struct at25_data {
struct spi_eeprom chip;
struct bin_attribute bin;
unsigned addrlen;
+ int has_sernum;
};

#define AT25_WREN 0x06 /* latch the write enable */
@@ -42,6 +46,9 @@ struct at25_data {
#define AT25_WRSR 0x01 /* write status register */
#define AT25_READ 0x03 /* read byte(s) */
#define AT25_WRITE 0x02 /* write byte(s)/sector */
+#define FM25_SLEEP 0xb9 /* enter sleep mode */
+#define FM25_RDID 0x9f /* read device ID */
+#define FM25_RDSN 0xc3 /* read S/N */

#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
#define AT25_SR_WEN 0x02 /* write enable (latched) */
@@ -51,6 +58,9 @@ struct at25_data {

#define AT25_INSTR_BIT3 0x08 /* Additional address bit in instr */

+#define FM25_ID_LEN 9 /* ID lenght */
+#define FM25_SN_LEN 8 /* serial number lenght */
+
#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */

/* Specs often allow 5 msec for a page write, sometimes 20 msec;
@@ -58,6 +68,9 @@ struct at25_data {
*/
#define EE_TIMEOUT 25

+#define IS_EEPROM 0
+#define IS_FRAM 1
+
/*-------------------------------------------------------------------------*/

#define io_limit PAGE_SIZE /* bytes */
@@ -132,6 +145,83 @@ at25_ee_read(
}

static ssize_t
+fm25_id_read(struct at25_data *at25, char *buf)
+{
+ u8 command = FM25_RDID;
+ ssize_t status;
+ struct spi_transfer t[2];
+ struct spi_message m;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof t);
+
+ t[0].tx_buf = &command;
+ t[0].len = 1;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = FM25_ID_LEN;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&at25->lock);
+
+ status = spi_sync(at25->spi, &m);
+ dev_dbg(&at25->spi->dev,
+ "read %Zd bytes of ID --> %d\n",
+ FM25_ID_LEN, (int) status);
+
+ mutex_unlock(&at25->lock);
+ return status ? status : FM25_ID_LEN;
+}
+
+static ssize_t
+fm25_sernum_read(struct at25_data *at25, char *buf)
+{
+ u8 command = FM25_RDSN;
+ ssize_t status;
+ struct spi_transfer t[2];
+ struct spi_message m;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof t);
+
+ t[0].tx_buf = &command;
+ t[0].len = 1;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = FM25_SN_LEN;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&at25->lock);
+
+ status = spi_sync(at25->spi, &m);
+ dev_dbg(&at25->spi->dev,
+ "read %Zd bytes of serial number --> %d\n",
+ FM25_SN_LEN, (int) status);
+
+ mutex_unlock(&at25->lock);
+ return status ? status : FM25_SN_LEN;
+}
+
+static ssize_t
+sernum_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ char binbuf[FM25_SN_LEN];
+ struct at25_data *at25;
+ int i;
+ char *pbuf = buf;
+
+ at25 = dev_get_drvdata(dev);
+ fm25_sernum_read(at25, binbuf);
+ for (i = 0; i < FM25_SN_LEN; i++)
+ pbuf += sprintf(pbuf, "%02x ", binbuf[i]);
+ sprintf(--pbuf, "\n");
+ return (3 * i);
+}
+static const DEVICE_ATTR_RO(sernum);
+
+static ssize_t
at25_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
@@ -301,12 +391,21 @@ static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,

/*-------------------------------------------------------------------------*/

-static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
+static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip,
+ int is_fram)
{
u32 val;
+ char *name;

memset(chip, 0, sizeof(*chip));
- strncpy(chip->name, "at25", sizeof(chip->name));
+ device_property_read_string(dev, "name", &name);
+ strncpy(chip->name, name, sizeof(chip->name));
+
+ if (is_fram) {
+ if (device_property_present(dev, "read-only"))
+ chip->flags |= EE_READONLY;
+ return 0;
+ }

if (device_property_read_u32(dev, "size", &val) == 0 ||
device_property_read_u32(dev, "at25,byte-len", &val) == 0) {
@@ -354,6 +453,13 @@ static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
return 0;
}

+static const struct of_device_id at25_of_match[] = {
+ { .compatible = "atmel,at25", .data = (const void *)IS_EEPROM },
+ { .compatible = "cypress,fm25", .data = (const void *)IS_FRAM },
+ { }
+};
+MODULE_DEVICE_TABLE(of, at25_of_match);
+
static int at25_probe(struct spi_device *spi)
{
struct at25_data *at25 = NULL;
@@ -361,25 +467,34 @@ static int at25_probe(struct spi_device *spi)
int err;
int sr;
int addrlen;
+ char id[FM25_ID_LEN];
+ const struct of_device_id *match;
+ int is_fram = 0;
+
+ match = of_match_device(of_match_ptr(at25_of_match), &spi->dev);
+ if (match)
+ is_fram = (int)(uintptr_t)match->data;

/* Chip description */
if (!spi->dev.platform_data) {
- err = at25_fw_to_chip(&spi->dev, &chip);
+ err = at25_fw_to_chip(&spi->dev, &chip, is_fram);
if (err)
return err;
} else
chip = *(struct spi_eeprom *)spi->dev.platform_data;

/* For now we only support 8/16/24 bit addressing */
- if (chip.flags & EE_ADDR1)
- addrlen = 1;
- else if (chip.flags & EE_ADDR2)
- addrlen = 2;
- else if (chip.flags & EE_ADDR3)
- addrlen = 3;
- else {
- dev_dbg(&spi->dev, "unsupported address type\n");
- return -EINVAL;
+ if (!is_fram) {
+ if (chip.flags & EE_ADDR1)
+ addrlen = 1;
+ else if (chip.flags & EE_ADDR2)
+ addrlen = 2;
+ else if (chip.flags & EE_ADDR3)
+ addrlen = 3;
+ else {
+ dev_dbg(&spi->dev, "unsupported address type\n");
+ return -EINVAL;
+ }
}

/* Ping the chip ... the status register is pretty portable,
@@ -402,6 +517,56 @@ static int at25_probe(struct spi_device *spi)
spi_set_drvdata(spi, at25);
at25->addrlen = addrlen;

+ if (is_fram) {
+ /* Get ID of chip */
+ fm25_id_read(at25, id);
+ if (id[6] != 0xc2) {
+ dev_err(&spi->dev,
+ "Error: no Cypress FRAM (id %02x)\n", id[6]);
+ return -ENODEV;
+ }
+ /* set size found in ID */
+ switch (id[7]) {
+ case 0x21:
+ at25->chip.byte_len = 16 * 1024;
+ break;
+ case 0x22:
+ at25->chip.byte_len = 32 * 1024;
+ break;
+ case 0x23:
+ at25->chip.byte_len = 64 * 1024;
+ break;
+ case 0x24:
+ at25->chip.byte_len = 128 * 1024;
+ break;
+ case 0x25:
+ at25->chip.byte_len = 256 * 1024;
+ break;
+ default:
+ dev_err(&spi->dev,
+ "Error: unsupported size (id %02x)\n",
+ id[7]);
+ return -ENODEV;
+ break;
+ }
+
+ if (at25->chip.byte_len > 64 * 1024) {
+ at25->addrlen = 3;
+ at25->chip.flags |= EE_ADDR3;
+ }
+ else {
+ at25->addrlen = 2;
+ at25->chip.flags |= EE_ADDR2;
+ }
+
+ if (id[8])
+ at25->has_sernum = 1;
+ else
+ at25->has_sernum = 0;
+
+ at25->chip.page_size = PAGE_SIZE;
+ }
+
/* Export the EEPROM bytes through sysfs, since that's convenient.
* And maybe to other kernel code; it might hold a board's Ethernet
* address, or board-specific calibration data generated on the
@@ -412,7 +577,7 @@ static int at25_probe(struct spi_device *spi)
* security codes, board-specific manufacturing calibrations, etc.
*/
sysfs_bin_attr_init(&at25->bin);
- at25->bin.attr.name = "eeprom";
+ at25->bin.attr.name = is_fram ? "fram" : "eeprom";
at25->bin.attr.mode = S_IRUSR;
at25->bin.read = at25_bin_read;
at25->mem.read = at25_mem_read;
@@ -428,15 +593,23 @@ static int at25_probe(struct spi_device *spi)
if (err)
return err;

+ /* Export the FM25 serial number */
+ if (at25->has_sernum) {
+ err = device_create_file(&spi->dev, &dev_attr_sernum);
+ if (err)
+ return err;
+ }
+
if (chip.setup)
chip.setup(&at25->mem, chip.context);

- dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
+ dev_info(&spi->dev, "%Zd %s %s %s%s, pagesize %u\n",
(at25->bin.size < 1024)
? at25->bin.size
: (at25->bin.size / 1024),
(at25->bin.size < 1024) ? "Byte" : "KByte",
at25->chip.name,
+ is_fram ? "fram" : "eeprom",
(chip.flags & EE_READONLY) ? " (readonly)" : "",
at25->chip.page_size);
return 0;
@@ -448,17 +621,13 @@ static int at25_remove(struct spi_device *spi)

at25 = spi_get_drvdata(spi);
sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
+ if (at25->has_sernum)
+ device_remove_file(&spi->dev, &dev_attr_sernum);
return 0;
}

/*-------------------------------------------------------------------------*/

-static const struct of_device_id at25_of_match[] = {
- { .compatible = "atmel,at25", },
- { }
-};
-MODULE_DEVICE_TABLE(of, at25_of_match);
-
static struct spi_driver at25_driver = {
.driver = {
.name = "at25",
--
1.9.1


\
 
 \ /
  Last update: 2015-10-07 13:41    [W:0.177 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site