lkml.org 
[lkml]   [2015]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
From
Date
On Thursday 24 September 2015 03:31 PM, Peter Ujfalusi wrote:

> with this series the edma two driver setup will be changed to have only one
> driver to support eDMA3. The legacy edma interface will be removed and eDMA can
> only be used via dmaengine API from this point on.
> In order to do the merge the following improvements has been done:
> - One driver instance per eDMA:
> - Any number of eDMA instances are supported (both legacy and DT boot)
> - Not relying on global variables, arrays, etc
> - Code simplification and optimizations in several places
>
> This change will also help us to do bigger changes in the eDMA driver since,
> since now we have only one driver to work with.
>
> The series has been tested on:
> da850-evm (OMAP-L138)
> - with legacy and DT boot (both eDMA0 and eDMA1 is enabled)
> - In code swapping the eDMA instances in legacy mode to make sure the second
> instance is handled correctly.
>
> am335x-evmsk
> - DT boot
>
> I think this series could go via the dmaengine tree. Changes are trivial under
> arch/arm/

I tested this series on DM6446 EVM using MMC/SD as EDMA client. It
worked well. For the arch/arm/mach-davinci parts, please add

Acked-by: Sekhar Nori <nsekhar@ti.com>

Vinod, if you prefer me replying with acks on individual patches, I can
do that too.

Regards,
Sekhar


\
 
 \ /
  Last update: 2015-10-07 13:01    [W:0.221 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site