lkml.org 
[lkml]   [2015]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/10] LED core improvements
Date
This is a third version of the patch set preparing the
ground for removing work queues from LED class drivers.
It is based on RFC [1].
Andrew, Pavel, Sakari - thanks for a review.

================
Changes from v2:
================
- added led_set_brightness_nopm() to be used from pm ops,
and modified led_set_brightness_nosleep() to call the former
- removed patch that renames EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
in the led-core.c - it is postponed until clear consensus is reached on it
- added acks from Pavel Machek
- removed from the set a patch that has been applied:
[PATCH 1/5] leds: core: Move LED core callbacks out of led-class.c

================
Changes from v1:
================
- removed useless use of else in led_set_brightness()
- switched to removing error code instead of emitting
warning from led_set_brightness_sync() in case software
blink fallback is enabled
- moved __led_set_brightness() contents to set_brightness_delayed()
- removed description of internal led_set_brightness_nosleep() from
led-class.txt documentation, and modified description of
led_set_brightness() and led_set_brightness_sync()
- renamed LED_BLINK_CHANGE flag to more meaningful
LED_BLINK_BRIGHTNESS_CHANGE
- Fixed stylistic issues in a few comments
- Adopted old brightness_set_sync() op description to
a new brightness_set_blocking() op
- Fixed led_set_brightness_nosleep to avoid scheduling
spurious set_brightness_work
- made LED core using EXPORT_SYMBOL_GPL consistently
- switched v4l2-flash-led-class wrapper to using
led_set_brightness_sync API for setting torch brightness
- merged with patch set
"LED flash: Set brightness in a sync way on demand"


======================
Original cover letter:
======================

This patch set prepares the ground for removing work queues
from LED class drivers, and is a follow up of the patch set [1].
LED core modifications have been reorganized to make them
more clear and easier to review. The patch set is reduced
in comparison to it its predecessor, to expose the modifications
indispensable for the LED core to gain the capability of handling
brightness_set_blocking ops, that is without work queues.

Thanks,
Jacek Anaszewski

[1] https://lkml.org/lkml/2015/8/20/426

Jacek Anaszewski (10):
leds: core: Add two new LED_BLINK_ flags
leds: Rename brightness_set_sync op to brightness_set_blocking
leds: core: Add led_set_brightness_nosleep{nopm} functions
leds: core: Use set_brightness_work for the blocking op
leds: core: Drivers shouldn't enforce SYNC/ASYNC brightness setting
Documentation: leds: Add description of brightness setting API
leds: max77693: Remove work queue
leds: aat1290: Remove work queue
leds: ktd2692: Remove work queue
media: flash: use led_set_brightness_sync for torch brightness

Documentation/leds/leds-class.txt | 13 +++
drivers/leds/led-class-flash.c | 6 +-
drivers/leds/led-class.c | 6 +-
drivers/leds/led-core.c | 116 ++++++++++++++++++------
drivers/leds/leds-aat1290.c | 50 +++-------
drivers/leds/leds-ktd2692.c | 41 ++-------
drivers/leds/leds-max77693.c | 57 ++----------
drivers/leds/leds.h | 27 +-----
drivers/leds/trigger/ledtrig-backlight.c | 8 +-
drivers/leds/trigger/ledtrig-default-on.c | 2 +-
drivers/leds/trigger/ledtrig-gpio.c | 6 +-
drivers/leds/trigger/ledtrig-heartbeat.c | 4 +-
drivers/leds/trigger/ledtrig-oneshot.c | 4 +-
drivers/leds/trigger/ledtrig-transient.c | 8 +-
drivers/media/v4l2-core/v4l2-flash-led-class.c | 8 +-
include/linux/leds.h | 27 ++++--
16 files changed, 177 insertions(+), 206 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2015-10-07 11:41    [W:0.234 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site