lkml.org 
[lkml]   [2015]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[REPOST PATCH v2] i2c-ocores: support big-endian register layout
Date
This allows using OpenCores I2C controller attached to its host in
native-endian mode with bi-endian CPUs. Example of such system is Xtensa
XTFPGA platform.

Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
Changes v1->v2:
- expand changelog with motivation for the change.

drivers/i2c/busses/i2c-ocores.c | 31 +++++++++++++++++++++++++++----
include/linux/i2c-ocores.h | 1 +
2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index abf5db7..11b7b87 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -92,6 +92,16 @@ static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value)
iowrite32(value, i2c->base + (reg << i2c->reg_shift));
}

+static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite16be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+ iowrite32be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg)
{
return ioread8(i2c->base + (reg << i2c->reg_shift));
@@ -107,6 +117,16 @@ static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg)
return ioread32(i2c->base + (reg << i2c->reg_shift));
}

+static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg)
+{
+ return ioread16be(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
+{
+ return ioread32be(i2c->base + (reg << i2c->reg_shift));
+}
+
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
i2c->setreg(i2c, reg, value);
@@ -428,6 +448,9 @@ static int ocores_i2c_probe(struct platform_device *pdev)
i2c->reg_io_width = 1; /* Set to default value */

if (!i2c->setreg || !i2c->getreg) {
+ bool be = pdata ? pdata->big_endian :
+ of_device_is_big_endian(pdev->dev.of_node);
+
switch (i2c->reg_io_width) {
case 1:
i2c->setreg = oc_setreg_8;
@@ -435,13 +458,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
break;

case 2:
- i2c->setreg = oc_setreg_16;
- i2c->getreg = oc_getreg_16;
+ i2c->setreg = be ? oc_setreg_16be : oc_setreg_16;
+ i2c->getreg = be ? oc_getreg_16be : oc_getreg_16;
break;

case 4:
- i2c->setreg = oc_setreg_32;
- i2c->getreg = oc_getreg_32;
+ i2c->setreg = be ? oc_setreg_32be : oc_setreg_32;
+ i2c->getreg = be ? oc_getreg_32be : oc_getreg_32;
break;

default:
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 1c06b5c..01edd96 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -15,6 +15,7 @@ struct ocores_i2c_platform_data {
u32 reg_shift; /* register offset shift value */
u32 reg_io_width; /* register io read/write width */
u32 clock_khz; /* input clock in kHz */
+ bool big_endian; /* registers are big endian */
u8 num_devices; /* number of devices in the devices list */
struct i2c_board_info const *devices; /* devices connected to the bus */
};
--
1.8.1.4


\
 
 \ /
  Last update: 2015-10-07 02:01    [W:0.046 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site