lkml.org 
[lkml]   [2015]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO
Date
The card detect GPIO is using IRQ_TYPE_LEVEL_LOW in the GPIO flag cells
but this defined constant is meant to be used for a IRQ and not a GPIO.
So instead use GPIO_ACTIVE_LOW that seems to be the original intention.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 46f88f86a50b..57d7c93cc72b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
};

&mmc1 {
- cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
--
2.4.3


\
 
 \ /
  Last update: 2015-10-06 11:41    [W:0.033 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site