lkml.org 
[lkml]   [2015]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC Patch 00/12] IXGBE: Add live migration support for SRIOV NIC
From
Date
On 10/29/2015 01:33 AM, Lan Tianyu wrote:
> On 2015年10月29日 14:58, Alexander Duyck wrote:
>> Your code was having to do a bunch of shuffling in order to get things
>> set up so that you could bring the interface back up. I would argue
>> that it may actually be faster at least on the bring-up to just drop the
>> old rings and start over since it greatly reduced the complexity and the
>> amount of device related data that has to be moved.
> If give up the old ring after migration and keep DMA running before
> stopping VCPU, it seems we don't need to track Tx/Rx descriptor ring and
> just make sure that all Rx buffers delivered to stack has been migrated.
>
> 1) Dummy write Rx buffer before checking Rx descriptor to ensure packet
> migrated first.

Don't dummy write the Rx descriptor. You should only really need to
dummy write the Rx buffer and you would do so after checking the
descriptor, not before. Otherwise you risk corrupting the Rx buffer
because it is possible for you to read the Rx buffer, DMA occurs, and
then you write back the Rx buffer and now you have corrupted the memory.

> 2) Make a copy of Rx descriptor and then use the copied data to check
> buffer status. Not use the original descriptor because it won't be
> migrated and migration may happen between two access of the Rx descriptor.

Do not just blindly copy the Rx descriptor ring. That is a recipe for
disaster. The problem is DMA has to happen in a very specific order for
things to function correctly. The Rx buffer has to be written and then
the Rx descriptor. The problem is you will end up getting a read-ahead
on the Rx descriptor ring regardless of which order you dirty things in.

The descriptor is only 16 bytes, you can fit 256 of them in a single
page. There is a good chance you probably wouldn't be able to migrate
if you were under heavy network stress, however you could still have
several buffers written in the time it takes for you to halt the VM and
migrate the remaining pages. Those buffers wouldn't be marked as dirty
but odds are the page the descriptors are in would be. As such you will
end up with the descriptors but not the buffers.

The only way you could possibly migrate the descriptors rings cleanly
would be to have enough knowledge about the layout of things to force
the descriptor rings to be migrated first followed by all of the
currently mapped Rx buffers. In addition you would need to have some
means of tracking all of the Rx buffers such as an emulated IOMMU as you
would need to migrate all of them, not just part. By doing it this way
you would get the Rx descriptor rings in the earliest state possible and
would be essentially emulating the Rx buffer writes occurring before the
Rx descriptor writes. You would likely have several Rx buffer writes
that would be discarded in the process as there would be no descriptor
for them but at least the state of the system would be consistent.

- Alex




\
 
 \ /
  Last update: 2015-10-29 17:21    [W:0.237 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site