Messages in this thread | | | From | Pavel Fedin <> | Subject | [PATCH v4 0/4] [PATCH v4 0/4] Exynos SROMc configuration and Ethernet support for SMDK5410 | Date | Thu, 29 Oct 2015 15:42:16 +0300 |
| |
This patch extends Exynos SROM controller driver with ability to configure controller outputs and enables SMSC9115 Ethernet chip on SMDK5410 board, which is connected via SROMc bank #3.
With this patchset, support for the whole existing SMDK range can be added. Actually, only bank number is different.
This patchset also depends on Exynos 5410 pinctrl support, introduced by patches 0003 and 0004 from this set: [PATCH v4 0/5] ARM: EXYNOS: ODROID-XU DT and LEDs http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/330862.html
Pinctrl support is necessary in order to correctly configure multifunctional pins of the Exynos chip.
v3 => v4: - Devices are now added as subnodes, with additional properties. This allows to cleary specify dependency. If configuration fails, error will be reported and child devices will not be probed. - These additional properties now have "samsung,srom-XXX" format - Fixed code style, now better understood.
v2 => v3: - Fixed up SROMc region size in the device tree - Reordered patches, documentation goes first now
v1 => v2: - Fixed some typos and bad labels in device tree - Improved documentation
Pavel Fedin (4): Documentation: dt-bindings: Describe SROMc configuration ARM: dts: Add SROMc to Exynos 5410 drivers: exynos-srom: Add support for bank configuration ARM: dts: Add Ethernet chip to SMDK5410
.../bindings/arm/samsung/exynos-srom.txt | 50 ++++++++++++++++++- arch/arm/boot/dts/exynos5410-smdk5410.dts | 41 +++++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 15 ++++++ arch/arm/mach-exynos/Kconfig | 2 +- drivers/soc/samsung/Kconfig | 2 +- drivers/soc/samsung/exynos-srom.c | 58 +++++++++++++++++++++- 6 files changed, 162 insertions(+), 6 deletions(-)
-- 2.4.4
| |