lkml.org 
[lkml]   [2015]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/9] PCI: ACPI: Setting up DMA coherency for PCI device from _CCA attribute
Date
This patch series adds support to setup DMA coherency for PCI device using
the ACPI _CCA attribute. According to the ACPI spec, the _CCA attribute
is required for ARM64. Therefore, this patch is a pre-req for ACPI PCI
support for ARM64 which is currently in development. Also, this should
not affect other architectures that does not define
CONFIG_ACPI_CCA_REQUIRED, since the default value is coherent.

In the process, this series also introduces enum dev_dma_attr and a set
of APIs to query device DMA attribute. These APIs replace the obsolete
device_dma_is_coherent(), and acpi_check_dma().

I have also included a patch from Jeremy posted here:
http://www.spinics.net/lists/linux-usb/msg128582.html

This patch series is now rebased from:
https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next

This patch series has been tested on AMD Seattle RevB platform.
The git tree containing tested code and pre-req patches is available here:
http://github.com/ssuthiku/linux.git pci-cca-v5

Changes from V4: (https://lkml.org/lkml/2015/10/21/535)
* Clean up from Hanjun, Bjorn, and Thomas review comments
* Rebased on top of Rafael's latest linux-next branch
* Added patch 7/9 to fix the pci_get_host_bridge_device leak
* Added Acked-by from Bjorn
* Added Reviewed-by from Hanjun

Changes from V3: (https://lkml.org/lkml/2015/8/26/389)
* Clean up suggested by Bjorn
* Introduce enum dev_dma_attr
* Replace device_dma_is_coherent() and acpi_check_dma() with
new APIs.

Changes from V2: (https://lkml.org/lkml/2015/8/25/549)
* Return -ENOSUPP instead of -1 (per Rafael's suggestion)
* Add WARN() when fail to setup DMA for PCI device when booting
ACPI (per Arnd's suggestion)
* Added Acked-by from Rob.
* Minor clean up

Changes from V1: (https://lkml.org/lkml/2015/8/13/182)
* Include patch 1 from Jeremy to enable support for _CCA=0
* Clean up acpi_check_dma() per Bjorn suggestions
* Split the original V1 patch into two patches (patch 3 and 4)

Jeremy Linton (1):
ACPI: Honor ACPI _CCA attribute setting

Suravee Suthikulpanit (8):
device property: Introducing enum dev_dma_attr
ACPI: Adding DMA Attribute APIs for ACPI Device
device property: Adding DMA Attribute APIs for Generic Devices
device property: ACPI: Make use of the new DMA Attribute APIs
device property: ACPI: Remove unused DMA APIs
of/pci: Fix pci_get_host_bridge_device leak
PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
PCI: ACPI: Add support for PCI device DMA coherency

drivers/acpi/acpi_platform.c | 7 +++++-
drivers/acpi/glue.c | 8 +++---
drivers/acpi/scan.c | 42 +++++++++++++++++++++++++++++++
drivers/base/property.c | 32 +++++++++++++++++------
drivers/crypto/ccp/ccp-platform.c | 15 ++++++++---
drivers/net/ethernet/amd/xgbe/xgbe-main.c | 8 +++++-
drivers/of/of_pci.c | 20 ---------------
drivers/pci/probe.c | 33 ++++++++++++++++++++++--
include/acpi/acpi_bus.h | 36 +++-----------------------
include/linux/acpi.h | 7 +++++-
include/linux/of_pci.h | 3 ---
include/linux/property.h | 10 +++++++-
12 files changed, 144 insertions(+), 77 deletions(-)

--
2.1.0



\
 
 \ /
  Last update: 2015-10-29 00:01    [W:0.054 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site