lkml.org 
[lkml]   [2015]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC 3/3] clocksource: add memory-mapped timer support in arm_arch_timer.c
Date
From: Fu Wei <fu.wei@linaro.org>

The patch add memory-mapped timer register support for arm_arch_timer driver
by using the information provided by the new GTDT driver of ACPI.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 136 +++++++++++++++++++++++++++++++++++
1 file changed, 136 insertions(+)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 77408fb..384573c 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -666,6 +666,15 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
needs_probing = true;
of_node_put(dn);

+#ifdef CONFIG_ACPI
+ /*
+ * Check if we have timer in GTDT table
+ */
+ if (!acpi_disabled && gtdt_timer_is_available(type) &&
+ !(arch_timers_present & type))
+ needs_probing = true;
+#endif
+
return needs_probing;
}

@@ -835,4 +844,131 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
return 0;
}
CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
+
+static u32 __init arch_timer_mem_cnttidr(struct acpi_gtdt_timer_block *gt_block)
+{
+ phys_addr_t cntctlbase_phy;
+ void __iomem *cntctlbase;
+ u32 cnttidr;
+
+ cntctlbase_phy = (phys_addr_t)gtdt_gt_cntctlbase(gt_block);
+ if (!cntctlbase_phy) {
+ pr_err("arch_timer: Can't find CNTCTLBase.\n");
+ return 0;
+ }
+
+ /*
+ * According to ARMv8 Architecture Reference Manual(ARM),
+ * the size of CNTCTLBase frame of memory-mapped timer
+ * is SZ_4K(Offset 0x000 – 0xFFF).
+ */
+ cntctlbase = ioremap(cntctlbase_phy, SZ_4K);
+ if (!cntctlbase) {
+ pr_err("arch_timer: Can't map CNTCTLBase\n");
+ return 0;
+ }
+ cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+ iounmap(cntctlbase);
+
+ return cnttidr;
+}
+
+static int __init arch_timer_mem_best_frame(struct acpi_table_header *table,
+ struct arch_timer_mem_data *data)
+{
+ struct acpi_gtdt_timer_block *gt_block;
+ u32 frame_number, timer_count, cnttidr;
+ int i;
+
+ gt_block = gtdt_gt_block(table, 0);
+ if (!gt_block) {
+ pr_err("arch_timer: Can't find GT Block.\n");
+ return -EINVAL;
+ }
+
+ timer_count = gtdt_gt_timer_count(gt_block);
+ if (!timer_count) {
+ pr_err("arch_timer: Can't find GT frame number.\n");
+ return -EINVAL;
+ }
+
+ if (gtdt_gt_timer_data(gt_block, 0, false, data)) {
+ pr_err("arch_timer: Can't get first phy timer.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get Generic Timer Counter-timer Timer ID Register
+ * for Virtual Timer Capability info
+ */
+ cnttidr = arch_timer_mem_cnttidr(gt_block);
+
+ /*
+ * Try to find a virtual capable frame.
+ * Otherwise fall back to the first physical capable frame.
+ */
+ for (i = 0; i < timer_count; i++) {
+ frame_number = gtdt_gt_frame_number(gt_block, i);
+ if (frame_number < ARCH_TIMER_MEM_MAX_FRAME &&
+ cnttidr & CNTTIDR_VIRT(frame_number)) {
+ if (!gtdt_gt_timer_data(gt_block, i, true, data)) {
+ arch_timer_mem_use_virtual = true;
+ return 0;
+ }
+ pr_warn("arch_timer: Can't get virt timer.\n");
+ }
+ }
+
+ return 0;
+}
+
+/* Initialize memory-mapped timer(wake-up timer) */
+static int __init arch_timer_mem_acpi_init(struct acpi_table_header *table)
+{
+ struct arch_timer_mem_data data;
+ void __iomem *cntbase;
+
+ if (arch_timers_present & ARCH_MEM_TIMER) {
+ pr_warn("arch_timer_mem: already initialized, skipping\n");
+ return -EINVAL;
+ }
+ arch_timers_present |= ARCH_MEM_TIMER;
+
+ if (arch_timer_mem_best_frame(table, &data))
+ return -EINVAL;
+
+ /*
+ * According to ARMv8 Architecture Reference Manual(ARM),
+ * the size of CNTBaseN frames of memory-mapped timer
+ * is SZ_4K(Offset 0x000 – 0xFFF).
+ */
+ cntbase = ioremap(data.cntbase_phy, SZ_4K);
+ if (!cntbase) {
+ pr_err("arch_timer: Can't map CntBase.\n");
+ return -EINVAL;
+ }
+ arch_counter_base = cntbase;
+
+ if (!data.irq) {
+ pr_err("arch_timer: Frame missing %s irq",
+ arch_timer_mem_use_virtual ? "virt" : "phys");
+ return -EINVAL;
+ }
+
+ /*
+ * Because in a system that implements both Secure and
+ * Non-secure states, CNTFRQ is only accessible in Secure state.
+ * So we try to get the system counter frequency from cntfrq_el0
+ * (system coprocessor register) here just like arch_timer.
+ */
+ arch_timer_detect_rate(NULL, NULL);
+
+ arch_timer_mem_register(cntbase, data.irq);
+ arch_timer_common_init();
+
+ return 0;
+}
+
+CLOCKSOURCE_ACPI_DECLARE(arch_timer_mem, ACPI_SIG_GTDT,
+ arch_timer_mem_acpi_init);
#endif
--
2.4.3


\
 
 \ /
  Last update: 2015-10-28 15:41    [W:1.215 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site