lkml.org 
[lkml]   [2015]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] mfd: arizona: Remove bindings covered in new subsystem specific docs
Date
Binding documentation has been added in new subsystem specific binding
documents. This patch removes the now duplicate documentation from the
MFD documentation.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v2:
- No longer moving the core regulators into the regulator binding document,
as they are properties of the device as a whole not just the regulators
- Moved the maintainer updates into a seperate patch

Lee, I have removed your ack because the patch has changed a fair amount.
Apologies if this would not have been your preference.

Thanks,
Charles

Documentation/devicetree/bindings/mfd/arizona.txt | 15 +++------------
1 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index a8fee60..18be0cb 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -44,7 +44,6 @@ Required properties:
Optional properties:

- wlf,reset : GPIO specifier for the GPIO controlling /RESET
- - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA

- wlf,gpio-defaults : A list of GPIO configuration register values. Defines
for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
@@ -67,21 +66,13 @@ Optional properties:
present, the number of values should be less than or equal to the
number of inputs, unspecified inputs will use the chip default.

- - wlf,hpdet-channel : Headphone detection channel.
- ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
- ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
- If this node is not mentioned or if the value is unknown, then
- headphone detection mode is set to HPDETL.
-
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt

-Optional subnodes:
- - ldo1 : Initial data for the LDO1 regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
- - micvdd : Initial data for the MICVDD regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
+Also see child specific device properties:
+ Regulator - ../regulator/arizona-regulator.txt
+ Extcon - ../extcon/extcon-arizona.txt

Example:

--
1.7.2.5


\
 
 \ /
  Last update: 2015-10-27 17:41    [W:0.095 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site