lkml.org 
[lkml]   [2015]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V4 0/8] PCI: ACPI: Setting up DMA coherency for PCI device from _CCA attribute
Date
On Tuesday, October 27, 2015 09:52:50 AM Bjorn Helgaas wrote:
> Hi Suravee,
>
> On Wed, Oct 21, 2015 at 08:52:03AM -0700, Suravee Suthikulpanit wrote:
> > This patch series adds support to setup DMA coherency for PCI device using
> > the ACPI _CCA attribute. According to the ACPI spec, the _CCA attribute
> > is required for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> > support for ARM64 which is currently in development. Also, this should
> > not affect other architectures that does not define
> > CONFIG_ACPI_CCA_REQUIRED, since the default value is coherent.
> >
> > In the process, this series also introduces enum dev_dma_attr and a set
> > of APIs to query device DMA attribute. These APIs replace the obsolete
> > device_dma_is_coherent(), and acpi_check_dma().
> >
> > I have also included a patch from Jeremy posted here:
> > http://www.spinics.net/lists/linux-usb/msg128582.html
> >
> > This patch series has been tested on AMD Seattle RevB platform.
> > The git tree containing tested code and pre-req patches are posted here:
> >
> > http://github.com/ssuthiku/linux.git pci-cca-v4
> >
> > Changes from V3: (https://lkml.org/lkml/2015/8/26/389)
> > * Clean up suggested by Bjorn
> > * Introduce enum dev_dma_attr
> > * Replace device_dma_is_coherent() and acpi_check_dma() with
> > new APIs.
> >
> > Changes from V2: (https://lkml.org/lkml/2015/8/25/549)
> > * Return -ENOSUPP instead of -1 (per Rafael's suggestion)
> > * Add WARN() when fail to setup DMA for PCI device when booting
> > ACPI (per Arnd's suggestion)
> > * Added Acked-by from Rob.
> > * Minor clean up
> >
> > Changes from V1: (https://lkml.org/lkml/2015/8/13/182)
> > * Include patch 1 from Jeremy to enable support for _CCA=0
> > * Clean up acpi_check_dma() per Bjorn suggestions
> > * Split the original V1 patch into two patches (patch 3 and 4)
> >
> > Jeremy Linton (1):
> > Honor ACPI _CCA attribute setting
> >
> > Suravee Suthikulpanit (7):
> > device property: Introducing enum dev_dma_attr
> > acpi: Adding DMA Attribute APIs for ACPI Device
> > device property: Adding DMA Attribute APIs for Generic Devices
> > device property: acpi: Make use of the new DMA Attribute APIs
> > device property: acpi: Remove unused DMA APIs
> > PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
> > PCI: ACPI: Add support for PCI device DMA coherency
> >
> > drivers/acpi/acpi_platform.c | 7 +++++-
> > drivers/acpi/glue.c | 8 +++---
> > drivers/acpi/scan.c | 42 +++++++++++++++++++++++++++++++
> > drivers/base/property.c | 32 +++++++++++++++++------
> > drivers/crypto/ccp/ccp-platform.c | 9 ++++++-
> > drivers/net/ethernet/amd/xgbe/xgbe-main.c | 9 ++++++-
> > drivers/of/of_pci.c | 20 ---------------
> > drivers/pci/probe.c | 36 ++++++++++++++++++++++++--
> > include/acpi/acpi_bus.h | 36 +++-----------------------
> > include/linux/acpi.h | 7 +++++-
> > include/linux/of_pci.h | 3 ---
> > include/linux/property.h | 10 +++++++-
> > 12 files changed, 145 insertions(+), 74 deletions(-)
>
> I had a couple minor comments. It's sort of a toss-up, but this feels
> more ACPI-flavored than PCI, so I assume Rafael will take this whole
> series unless I hear otherwise.

I'll do that.

> Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Thanks for the help with reviewing this!

Rafael



\
 
 \ /
  Last update: 2015-10-27 16:21    [W:0.110 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site