lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/5] mtd: ofpart: update devicetree binding specification
On Sun, Oct 11, 2015 at 01:04:02PM -0700, Brian Norris wrote:
> Hi DT maintainers,

Last call: I'd like a reviewer that
(1) does DT reviews somewhat regularly and
(2) is not me.

If I can't get one soon, I'll take this for 4.4.

Thanks,
Brian

> It's a bit hypocritical of me, since I've been a slow reviewer as well,
> but... can we get some review on this one? Usually, I'm comfortable
> taking driver DT bindings without your review, but this one is a bit
> more generic and is more far-reaching than the average driver.
>
> I'm not a big fan of this change, and I don't quite understand why the
> bus driver (the SPI bus, which is a level up from the SPI device / MTD
> node) can specify its grandchildren (see spi-samsung.txt). But given the
> constraints, I think Michal's solution is OK. And I do agree that MTD's
> ofpart should be bit more specific.
>
> Anyway, a quick look and an Ack/Nak would be appreciated.
>
> Thanks,
> Brian
>
> On Tue, Aug 18, 2015 at 03:34:08PM -0000, Michal Suchanek wrote:
> > To avoid conflict with other drivers using subnodes of the mtd device
> > create only one ofpart-specific node rather than any number of
> > arbitrary partition subnodes.
> >
> > Signed-off-by: Michal Suchanek <hramrach@gmail.com>
> > ---
> > v3:
> >
> > - rename DT node ofpart -> partitions
> > ---
> > .../devicetree/bindings/mtd/partition.txt | 68 +++++++++++++---------
> > 1 file changed, 40 insertions(+), 28 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
> > index 8e5557d..8c2aff7 100644
> > --- a/Documentation/devicetree/bindings/mtd/partition.txt
> > +++ b/Documentation/devicetree/bindings/mtd/partition.txt
> > @@ -4,10 +4,16 @@ Partitions can be represented by sub-nodes of an mtd device. This can be used
> > on platforms which have strong conventions about which portions of a flash are
> > used for what purposes, but which don't use an on-flash partition table such
> > as RedBoot.
> > +
> > +The partition table should be partitions subnode of the mtd node. Partitions are
> > +defined in subnodes of the partitions node.
> > +
> > +For backwards compatibility partitions as direct subnodes of the mtd device are
> > +supported. This use is discouraged.
> > NOTE: if the sub-node has a compatible string, then it is not a partition.
> >
> > -#address-cells & #size-cells must both be present in the mtd device. There are
> > -two valid values for both:
> > +#address-cells & #size-cells must both be present in the partitions subnode of the
> > +mtd device. There are two valid values for both:
> > <1>: for partitions that require a single 32-bit cell to represent their
> > size/address (aka the value is below 4 GiB)
> > <2>: for partitions that require two 32-bit cells to represent their
> > @@ -28,44 +34,50 @@ Examples:
> >
> >
> > flash@0 {
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > + partitions {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> >
> > - partition@0 {
> > - label = "u-boot";
> > - reg = <0x0000000 0x100000>;
> > - read-only;
> > - };
> > + partition@0 {
> > + label = "u-boot";
> > + reg = <0x0000000 0x100000>;
> > + read-only;
> > + };
> >
> > - uimage@100000 {
> > - reg = <0x0100000 0x200000>;
> > + uimage@100000 {
> > + reg = <0x0100000 0x200000>;
> > + };
> > };
> > };
> >
> > flash@1 {
> > - #address-cells = <1>;
> > - #size-cells = <2>;
> > + partitions {
> > + #address-cells = <1>;
> > + #size-cells = <2>;
> >
> > - /* a 4 GiB partition */
> > - partition@0 {
> > - label = "filesystem";
> > - reg = <0x00000000 0x1 0x00000000>;
> > + /* a 4 GiB partition */
> > + partition@0 {
> > + label = "filesystem";
> > + reg = <0x00000000 0x1 0x00000000>;
> > + };
> > };
> > };
> >
> > flash@2 {
> > - #address-cells = <2>;
> > - #size-cells = <2>;
> > + partitions {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> >
> > - /* an 8 GiB partition */
> > - partition@0 {
> > - label = "filesystem #1";
> > - reg = <0x0 0x00000000 0x2 0x00000000>;
> > - };
> > + /* an 8 GiB partition */
> > + partition@0 {
> > + label = "filesystem #1";
> > + reg = <0x0 0x00000000 0x2 0x00000000>;
> > + };
> >
> > - /* a 4 GiB partition */
> > - partition@200000000 {
> > - label = "filesystem #2";
> > - reg = <0x2 0x00000000 0x1 0x00000000>;
> > + /* a 4 GiB partition */
> > + partition@200000000 {
> > + label = "filesystem #2";
> > + reg = <0x2 0x00000000 0x1 0x00000000>;
> > + };
> > };
> > };
> > --
> > 2.1.4
> >


\
 
 \ /
  Last update: 2015-10-27 03:21    [W:0.071 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site