lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data.
On Mon, Oct 26, 2015 at 05:24:33PM +0100, Marc Titinger wrote:
> when checking for the value of the shunt resistor.
>
> Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
> ---
> drivers/hwmon/ina2xx.c | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
> index 3edd163..1946433 100644
> --- a/drivers/hwmon/ina2xx.c
> +++ b/drivers/hwmon/ina2xx.c
> @@ -414,7 +414,6 @@ static const struct attribute_group ina226_group = {
> static int ina2xx_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - struct ina2xx_platform_data *pdata;
> struct device *dev = &client->dev;
> struct ina2xx_data *data;
> struct device *hwmon_dev;
> @@ -425,14 +424,13 @@ static int ina2xx_probe(struct i2c_client *client,
> if (!data)
> return -ENOMEM;
>
> - if (dev_get_platdata(dev)) {
> - pdata = dev_get_platdata(dev);
> - data->rshunt = pdata->shunt_uohms;
> - } else if (!of_property_read_u32(dev->of_node,
> - "shunt-resistor", &val)) {
> - data->rshunt = val;
> - } else {
> - data->rshunt = INA2XX_RSHUNT_DEFAULT;
> + if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
> + struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
> +
> + if (pdata)
> + val = pdata->shunt_uohms;
> + else
> + val = INA2XX_RSHUNT_DEFAULT;
> }
>
> /* set the device type */
> @@ -440,10 +438,11 @@ static int ina2xx_probe(struct i2c_client *client,
> data->config = &ina2xx_config[data->kind];
> data->client = client;
>
> - if (data->rshunt <= 0 ||
> - data->rshunt > data->config->calibration_factor)
> + if (val <= 0 || val > data->config->calibration_factor)
> return -ENODEV;
>
> + data->rshunt = val;
> +

I think it would be better to rearrange the code a bit.
The code now looks odd, with value being assigned, then the assignment
of data->kind etc, followed by checking val.

It might be better to do the assignments first, then calculate val,
and check its range immediately.

> ina2xx_regmap_config.max_register = data->config->registers;
>
> data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-10-27 02:21    [W:1.217 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site