lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 1/3] PCI: iproc: generate proper configuration access cycles
From
Date
Hi Jisheng,

On 10/26/2015 4:02 AM, Jisheng Zhang wrote:
> Inspired by Russell King's patch[1], I found current iproc also has the
> same issue of "reading 32-bits from the command register, modifying the
> command register, and then writing it back has the effect of clearing
> any status bits that were indicating at that time" as pointed out by
> Russell. This patch fix this issue by using the pci_generic_config_write.
>
> [1]http://www.spinics.net/lists/linux-pci/msg44869.html
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
> drivers/pci/host/pcie-iproc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index fe2efb1..0c423f2 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -111,7 +111,7 @@ static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
> static struct pci_ops iproc_pcie_ops = {
> .map_bus = iproc_pcie_map_cfg_bus,
> .read = pci_generic_config_read32,
> - .write = pci_generic_config_write32,
> + .write = pci_generic_config_write,
> };
>
> static void iproc_pcie_reset(struct iproc_pcie *pcie)
>

I have already confirmed with the ASIC team that the current iProc PCIe
controller requires 32-bit aligned access into the configuration space
due to the way how it was integrated into various iProc SoCs including
NSP, Cygnus, and NS2.

This change will prevent the driver from working properly.

I've informed our ASIC team about this issue and all future iProc based
SoCs should be able to support 8-bit, 16-bit access and therefore
pci_generic_config_write/read can be used for those SoCs.

Thanks,

Ray


\
 
 \ /
  Last update: 2015-10-26 18:41    [W:0.068 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site