lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/3] Mediatek SPI-NOR flash driver
Date
This series is based on v4.3-rc1 and l2-mtd.git
(git://git.infradead.org/l2-mtd.git)

Change in v5:
1: add "status = "disable"" to device tree
2: add document "flash" node
3: fix some statement error in Kconfig file
4: fix alphabetical order error in makefile
5: delete the parament "mtd_info *mtd" in mt8173_nor structure
6: delete SPINOR_OP_WREN repeated calls
7: add mt8173_nor_do_tx & mt8173_nor_do_rx for them full potential
8: use a subnode to represent the flash

Change in v4:
1: delete the parament "write_enable" for mt8173_nor_write_reg
2: fix the build warning for calling mt8173_nor_write_single_byte

Change in v3:
1: use switch() to replace some if-else statement
2: use shifts to replace endianness statement
3: delete some unused macros
4: use auto-increment mechanism for single write
5: write address added to 32bytes

Change in v2:
1. Rebase to 4.3-rc1
2. propagate error code
3. delete mux clock and axi clock in dts file
4. descripts more exactly for binding file
5. change file names from mtk-nor.c to mtk_quadspi.c
6. delete some functions witch were used once time

Bayi Cheng (3):
doc: dt: add documentation for Mediatek spi-nor controller
mtd: mtk-nor: mtk serial flash controller driver
arm64: dts: mt8173: Add nor flash node

.../devicetree/bindings/mtd/mtk-quadspi.txt | 41 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/mtk-quadspi.c | 491 +++++++++++++++++++++
5 files changed, 556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c

--
1.8.1.1.dirty



\
 
 \ /
  Last update: 2015-10-26 15:01    [W:0.306 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site