lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller
From
Date
On 10/26/2015 11:26 AM, Bharat Kumar Gogada wrote:
>>> + device_type = "pci";
>>> + interrupt-parent = <&gic>;
>>> + interrupts = < 0 118 4
>>> + 0 116 4
>>> + 0 115 4 // MSI_1 [63...32]
>>> + 0 114 4 >; // MSI_0 [31...0]
>>
>> Better write these as tuples:
>>
>> interrupts = <0 118 4>, <0 116 4>, <0 115 4>, <0 114 4>;
>>
>> And maybe reverse the order? It looks that might be what the soc
>> integration person had in mind.
>>
>> Also, what is interrupt <0 117 4>? Is that connected here as well?
>> Better list it as well then, even if you don't use it.
>>
> We have it but not using it, we will list it.
>
>>> + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
>>> + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1
>>> + 0x0 0x0 0x0 0x2 &pcie_intc 0x2
>>> + 0x0 0x0 0x0 0x3 &pcie_intc 0x3
>>> + 0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
>>
>>> + msi-parent = <&nwl_pcie>;
>>> + reg = <0x0 0xfd0e0000 0x1000
>>> + 0x0 0xfd480000 0x1000
>>> + 0x0 0xE0000000 0x1000000>;
>>
>> Same grouping for reg and interrupt-map as above for interrupts.
>
> Grouping reg and interrupt-map as tuples will make lengthy line and reduces readability, is it compulsory ?


FYI: Just this.
reg = <0x0 0xfd0e0000 0x1000>,
<0x0 0xfd480000 0x1000>,
<0x0 0xe0000000 0x1000000>;

Also please make sure that you are using the same case for addresses.
That 0xE0000000 case above.

Thanks,
Michal


\
 
 \ /
  Last update: 2015-10-26 14:01    [W:0.063 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site